How to use XY-T01 Digital Thermostat Module - Robojax

Hardware is explained and practically shown, wiring shown, alarm settings and temperature settings shown and demonstrated as heater or refrigerator controller.

***** Free Arduino Course worth $200****

The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊

*** Purchase this from Affiliated Stores ***
Banggood:

Jump to different section of video by clicking on the time:
00:00 Start
00:26 Introduction
03:10 Hardware Explained
05:11 Cold Mode explained
08:37 Heat Mode explained
10:42 Setting Tolerance
12:44 Setting Alarm
14:43 Setting Delay (OPH)
17:47 Setting Temperature Offset

Tutorial by Ahmad Shamshiri form Canada
****************************
****************************

Get other projects code and learn Arduino

**** AFFILIATE PROGRAM ****
#robojax #robojax_thermostat

[MariRobert]

Best thermostat ever.It runs smooth and has a lot of options and is so sensitive (in a good way)...the best of the best and very afordable...

[rays.]

Nice little gadget, I bought 4 of these and they work great, except the alarm does not sound @ high temperature..
The display will flash and the relay turns off. I can't figure how to get the alarm to buzz. It would be nice if the unit had C/F options and a way to have the display light turn off after a certain time.. If anyone knows how to get the alarm to work, please let me know..

[cofa]

Hi Ahmad ! Another great review about a usefull module, nice work man ! If i may suggest, anything about emergency backup power for an arduino would be very interesting ;) maybe with a lithium battery charging while the set is normaly powered and that would power back if the main power shuts down. As english is not my first language i may not be very clear but i think you'll get the idea :) Have a nice day man !

[sondeepahuja]

Thanks for another nice video. Btw from the video it seems 1 unit of OPH represents 20seconds (40° was reached at 50seconds on the timer and the bulb turned on at 1minute10seconds)

[JahanZeb]

Awesome product review dear Ahmad. I am also reviewing items and much more on my channel. Great to see your video.

[acehaag]

Have you tried the serial out. I assume you could just connect TX to RX and RX to TX on the Arduino?

[PeterWa]

Hi. Do you know how to connect to uart port from an arduino or esp32 for logging temp data?

[pcampanotti]

Thanks for the informative video! If you remove power from the module does the module remember the last settings? Thanks Again!

[nqdmlue]

I own this board, it works very well, it controls a fan under a refrigerator. What bothers me is the blue indicator that lights up day and night. Is there any way to turn it off? I can also imagine desoldering a connection on the display. I just don't know which one. What is the production name of the display so that I can find the pinout information on the internet? Thank you.

[rjmyers]

Thank You for explaining. Have 12V DC in and 12V DC out, why cannot control both from this?

[forextraderradioman]

Thank you for this very helpful video! vy73 from Hamburg/Germany, Dietmar, DL4HAO :)

[evotab]

Hi, is there a way to change screen brightness of XY-T01?

[michaelgaudillat]

Hello, Thx for the review.
Do you know what is the Amp consumption on a 5V powering ?
Does the device keep settings when you power it off ?

[TBooneFisher]

How do setup the Android App and Wifi connection via router? The manual? is very confusing at best.

[harriehausenman]

Hey there and thanks for the great video!
I am really struggling to interpret the data received from UART and so far, I am totally in the dark. Any hints on how to interpret serial data coming from device?
Thanks so much again.

[luismiguellara]

Hi, thank you. It can be connected to an Arduino to get the temperature lecture or any other signal to activate another devices from the Arduino?

[hichmaz]

Hello,
thanks a lot for this video, can you please confirm if it is reliable and can be used for years or it could shut down at any moment?

[penncapt]

Rated at 10 amps. Could you show a wire and connector rated at 10 amps that actually fits this? I know 4 year old vid.

[marksoberay]

Hi there love your channel! How far can that temperature sensor reach? I need about 120 feet

[abduzifan]

this one can control extruder hot end ?