filmov
tv
Clone PI-W Atmega8 (Arduino) Metal Detector short Review
Показать описание
At first glance, the module is solidly made, the elements are precisely placed and well soldered. The price is less than $50, including postage. In this case, it is an SMD version of this detector, and you can find the same metal detector made with standard components made according to an identical schematic diagram.
The coil is identical to the one I use in my DIY Pulse Induction Metal Detectors, and consists of 25 turns of enameled copper wire with a diameter of 0.4 to 0.6mm. The diameter of the coil is 200 mm.
In order to put the metal detector into operation, it is necessary to solder only six wires, two from the power supply, two from the speaker, and two from the coil. The detector worked immediately after switching on, but only required some adjustment.
I am really pleasantly surprised by the features such as sensitivity and stability in operation, considering that it is a very inexpensive module, and to make a complete mid-range metal detector we need almost no knowledge from the field of electronics. All we have to do is solder a few wires, and the only thing is to be very careful about the polarity of the battery.
Detailed instructions, schematic and code at :
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #metaldetector #pcbway
The coil is identical to the one I use in my DIY Pulse Induction Metal Detectors, and consists of 25 turns of enameled copper wire with a diameter of 0.4 to 0.6mm. The diameter of the coil is 200 mm.
In order to put the metal detector into operation, it is necessary to solder only six wires, two from the power supply, two from the speaker, and two from the coil. The detector worked immediately after switching on, but only required some adjustment.
I am really pleasantly surprised by the features such as sensitivity and stability in operation, considering that it is a very inexpensive module, and to make a complete mid-range metal detector we need almost no knowledge from the field of electronics. All we have to do is solder a few wires, and the only thing is to be very careful about the polarity of the battery.
Detailed instructions, schematic and code at :
Visit my Youtube Channel for more Projects , DIY and How To Make videos:
by mircemk
SUBSCRIBE LIKE AND SHARE !!!!
Thanks for your Support !
#arduino #metaldetector #pcbway
0:10:31
Clone PI-W Atmega8 (Arduino) Metal Detector short Review
0:02:11
Pulse induction metal detector
0:01:29
ATMEGA8 16PU recording and configuration fuses Clone pi W
0:12:26
Clone PI-W - Simple and cheap ready-made metal detector module
0:09:33
Clone PI-AVR DIY metal detector revue
0:00:55
Detector de metais Clone pi W
0:01:32
Test coil metal detector Clone pi W black board
0:00:15
Clone pi W
0:00:45
Сделал ТУРБО плату металлоискателя Clone-PiW !!!
0:00:52
Detector de metais Clone pi W Black board leds azuis
0:02:14
Pi-W clone metal detector test
0:00:16
Detector de metais Clone pi W
0:02:16
Prueba de PROFUNDIDAD detector CLONE PI-W
0:00:16
Detector de metais Clone pi W
0:11:41
Dual Field Coil DIY project for PI Detector
0:00:57
Arduino nano pulse induction metal detector ANPI
0:09:50
DIY Sensitive STM32 Pulse Indiction Metal Detector (Arduino IDE)
0:08:32
DIY Very simple Arduino Metal Detector
0:02:04
How to set up a Tracker PI-3 metal detector for a coil
0:01:13
Clone pi-avr solution
0:01:22
Clone Pi W
0:03:48
How to Make Arduino Metal Detector Circuit
0:00:43
CLONE pi w test
0:01:50
PI metal detector with 10 cm coil
Комментарии