filmov
tv
Do-More Slope PLC Instruction: Everything You Need to Know!
Показать описание
The Calculate Slope (SLOPE) instruction in the Do-More Designer calculates the slope of the line between two points.
The first point is the value of the specified input that is recorded when the instruction is enabled; the second point is recorded at the end
of the Sample Time.
Each time the calculation is made, the first point is set equal to the second point, and a new second point is recorded at the end
of the next Sample Time. This process of computing the slope and shifting to the next point continues as long as the instruction is enabled.
Analog input WX0 will be used as the input at a 1-second sample time. WY0 will contain the slope calculated. In our case, X0 will enable the slope instruction in our Do-More PLC.
Programming and examples of the BRX Do-More series can be found at this URL:
There are several reasons why we are using the BRX Do-More Controller. Here are just a few.
– Standalone PLC with built-in I/O
– Built-in Data Logging
– Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
– Built-in Analog input and output
– Integrated motion control
– High-speed counters
– Powerful instruction set (Video of Instructions in software)
– Ability to expand the system with a variety of modules
– Part of the Do-More series of PLCs uses the same free software. (Do-More Designer)
– Integrated simulator in the software capable of external communications for testing
#shorts
ACC Automation
The first point is the value of the specified input that is recorded when the instruction is enabled; the second point is recorded at the end
of the Sample Time.
Each time the calculation is made, the first point is set equal to the second point, and a new second point is recorded at the end
of the next Sample Time. This process of computing the slope and shifting to the next point continues as long as the instruction is enabled.
Analog input WX0 will be used as the input at a 1-second sample time. WY0 will contain the slope calculated. In our case, X0 will enable the slope instruction in our Do-More PLC.
Programming and examples of the BRX Do-More series can be found at this URL:
There are several reasons why we are using the BRX Do-More Controller. Here are just a few.
– Standalone PLC with built-in I/O
– Built-in Data Logging
– Communication ability – Ethernet Port, RS232, RS485, USB – support for protocols such as Modbus RTU, Modbus TCP, ASCII, K-sequence (DirectLOGIC users), Custom Protocols (ASCII over serial, TCP or UDP over Ethernet)
– Built-in Analog input and output
– Integrated motion control
– High-speed counters
– Powerful instruction set (Video of Instructions in software)
– Ability to expand the system with a variety of modules
– Part of the Do-More series of PLCs uses the same free software. (Do-More Designer)
– Integrated simulator in the software capable of external communications for testing
#shorts
ACC Automation
0:00:56
Do-More Slope PLC Instruction: Everything You Need to Know!
0:00:58
AutomationDirect Do-more Designer: Using the LERP Instruction
0:05:19
Scaling a 4-20mA Analog Input in an Allen Bradley PLC Ladder Logic
0:08:41
Do-more Manual Training PID Temperature Part 5B from AutomationDirect
0:49:34
Scaling sensor data for a PLC
0:17:52
Using Slope to Talk About Linear Data Sets
0:22:52
Flare System | Components and Functions | Piping Mantra |
0:03:13
Analog Inputs Part 3: Helpful Hints for the GS4 Variable Frequency Drive (VFD) from AutomationDirect
1:31:29
plc2 Compact Logix Analog IO card Configuration Part 2
0:02:29
PSS® Time-based Modeling: Managing the Changing Electrical Grid
0:00:44
MULTILIFT Ultima - Slope detection
0:49:53
EET 4450 Lec 2
0:10:07
Euler's method | Differential equations| AP Calculus BC | Khan Academy
0:48:34
PLC101 - VFD Basics
0:06:39
AUTOMATED PARKING GARAGE | SIMULATION OF AUTOMATIC PARKING GARAGE IN PLC |
0:34:24
Single Loop Control Methods - Tank Level Tuning // Chapter 6
0:02:02
Schoolnet Boosts Math Instruction
0:15:03
Parking Cars Simulator PLC Programming Part 2
0:07:03
PID - GS4 VFD Tank Filling from AutomationDirect
0:21:16
McGraw Hill Algebra 1, Chapter 1, Lesson 7 - Functions
0:57:39
UDL in Career Preparation Programs
6:28:45
Power Electronics for Grid Integration Day 1
0:37:10
How Siemens AG Built an Enterprise-Wide Data Mesh Architecture on Snowflake
0:45:03
Linear Data Analysis - Math Common Core Standards Webinar
Комментарии