Real Avid Armorers Master Kit

This is a review and unboxing of the Real Avid Armorers Master Kit which contains all of the tools needed for a build from beginning to end.

-
NOTICE: VIDEOS ARE RECORDED ON A PRIVATE RANGE UNDER PROFESSIONAL SUPERVISION.

FOLLOW ME ON
Web - .

Support this channel on Patreon
Check out my T-Shirts

NOTICE: VIDEOS ARE RECORDED ON A PRIVATE RANGE UNDER PROFESSIONAL SUPERVISION.
(DISCLAIMER: This post may contain paid advertisements or affiliate links. What is an affiliate link? It means that if you click on one of the product links, The Daily Shooter will receive a small commission at no extra cost to you. This helps support the channel and allows awesome future content. Thank you for the support!
DO NOT try anything you see in this video at home. All work should be performed by a trained professional. Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. .These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.

[theneighborguy]

Their customer service is among the best.
I ordered a kit, one of the buckles was jacked up, I emailed them and they overnighted a new one, no questions asked.
I've done 3 assemblies in the past 2 months and the kit has been perfect.
I use a different torque wrench and geissele gas pin punches, but this kit is definitely of great quality.

[americanpatriot]

I love those kits, I got one a little over a year ago and they’re an asset to your build. I recommend them to/for anyone who builds AR’s.

[chrissewell]

I had bought almost all these tools, when this kit came out...😭. But I highly recommend there tools. Most all of them are multi taskers, well made and very well designed!

[krakenprecision]

Good video. A couple things of note. The bench block has a magnetized bottom so when you punch out a roll pin it doesn’t go flying. It sticks under the bottom. Also the twisty thing on the bench block is for the ejector instead of the extractor. The reaction rod upper holder has three pins in the red cap. The center one is used just as explained in the video but the two on the other side are also removable and are placed into the holes on the flat part so you can position the upper in any direction in the vice. The lower vice block is the best one I’ve seen yet. When it’s tightened in the mag well it holds it solid. There is not “slop”. A couple things that would have made the kit better get rid of the “D” ring tool and add some crows feet for other barrel nuts and a breaker bar, get rid of two of the plastic picks and add a couple metal ones, add a couple common hex wrenches for gas blocks and hand grips etc, change out the cheap torque wrench for a click type, and add a spanner wrench, also add a gas block alignment tool. Otherwise it’s a great kit. Wait for it to go on sale. Usually runs around $250, got mine by joining a buyers club and with a 10% discount I got it for $150.

[stulewallen]

I was an armorer in the USMC (2111) and worked on thousands if not tens of thousands of M16’s. There were only a handful of M16 specific tools. Most of them were not even daily use. I think my most used tools were pin punches and a small brass hammer. As I watched this video I was struck by the fact that the same thought kept entering my mind: “ahhh that’s neat and could be handy.” If you have money to burn and space to store this kit, I guess go for it.

[randyphillips]

I've had my eye on this kit for awhile. It almost has everything you need. I was really disappointed when I saw it doesn't have allen wrenches. Got to have those for the gas block and trigger guard.

[CorneliusFahey]

Put pressure on the “ejector” not the extractor. This will allow you to remove the ejector so you can use you bolt to check headspace.

[dustinhaywood]

Wife picked one up for me today. Love it. Quality stuff.

[derek]

Picked this up for $180, haven’t used it yet but from many reviews it seems to have everything you need. Got an upper receiver block to make it easier to lap the uppers separately though.

[gman]

1 thing I love about your channel is you show good stuff. The only problem I have is when it comes to tool I will say " I don't know what it is or what it's for but I need it". I get myself in trouble all the time for that

[SHWELL]

I have this kit and it works out great!

[joelriggs]

Having their vice makes this kit even more worth it

[bluer]

3 things they should add to that kit.
1. head space go no go checkers.
2. a tool to install and remove gas rings without damaging them.
3. a steel cap for the hammer

[rabidtaz]

Great video. I've got about 10 or 12 builds with mine. The more I use it the more features I find.

[kermitlovesbacon]

I picked up one of these with my Trump Bucks

[pestilantsoul]

Great review! I've got the mag well block and the bench block, they worked out phenomenal on my last build. Really like the thought and engineering that went into their tools, pretty in disposable tools.

[screamingemu]

Can’t wait to see this in action with your future builds👍🏽

[pedrovilla]

This kit works great i used it for my fist build it has everything you need and it comes with great instructions the hammer wrench works great a good deal

[jaysherman]

The front takedown pin tool from avid is a life saver.

[BastAdvocate]

Very nice find, Will. I'm gettin one-a-these! Thanks for the review.