How to fix Electrolux/AEG error code E10

It's two common fault that gives the error code E10.
1. A dirty water intake filter on back of the machine.
2. A loose hose inside the machine.

Want to support me?
Click the links below.

[berfbuggers]

You absolute legend.

Some how my pipe came loose. Stuck that bastard back in place with a cable tie & now my washing machine works.

[Jeetix]

Service team did not visit, ordered parts, and took 2 weeks to schedule what took me 2 minutes, 2 screws, and a youtube search. Thank you. :)

[loiphin]

Thanks much! I was having the worst weekend of my life. Lack of sleep combined with TV stopped working, sons PC is acting up, and now the washing machine giving me an error code E10 all on the same day, I was ready to run away. But your video was exactly what the problem was. Tusen tusen takk! Helgen er bra igjen :)

[kevinwoodley]

You are a superstar. I had exactly the same problem (E10) and thanks to your video had it sorted in 5 minutes and no massive expensive bill from a repair man. Result 👍👍

[paulclaridge]

Many thanks for showing this fix - exactly the same problem for me, not sure I would have spotted the loose pipe without knowing what to look for. You saved a lot of hassle - cheers!

[karlajensen]

Yeah legend, saved me a lot of mucking around and or it heading to the scrappers.

Has taken the entire day to fix the laundry after the unit did not stop filling and burst the door open flooding my laundry.

[solace]

Have Electrolux ewf14922 9kg washer
Threw out E10 error with flooding of water in the drum
Did everything the manual suggested including cleaning the drain filter, intake water filter and cleaning dispenser tray - no dice
Popped the top off and sure enough the the bloody hose was off with a flimsy metal part which barely held it in place
You are a legend sir

[burakbozak]

I have elektrolüx 1286 washing machine. My machine got e10 error code and began to throw water from the detergent container. I am appreciate to you for this video. This realy worked and my machine turn to normal.

[jordiFax]

You are a HERO! Thanks a lot for that, solved the problem in 5 minutes after spending hours going through the manual and cleaning filters and valves... Thanks thanks thanks!

[VideokommunikatorCh]

You are my hero! I was diving into the machine for hours until I found your video. You saved me a major investment. Thank you so much!

[Anonym_Bruker]

Hi!
I had exactly this problem back in 2013, in less than a year after byuing this machine.
This seems to be a small design-flaw of this type. Mine is a: EWF1486HDW

Last time I first tried to fix it just by re-attaching the hose, but then the hose popped off just a few weeks later.
Then I used a small strip to fasten the hose. Since then, it has worked perfectly since.
Until today...

Now the same issue occured. The machine filles with a lot of water, and after a while the error code E10 appears.
When I opened my machine, I looked down at an old friend:
The loose hose :)
After fasten it once more with a new strip, I hope my machine will last for even a few years.

When waiting for the spinn/drain program to run, I looked at youtube to see if anyone already had made a video for this, and found this video.
Nice to see that this video has been out for a while, hopefully helping other people with the same issue that is very easy to solve. :)

[blinnis]

You are a lifesaver! Electrolux should put this solution as nr 1 of all possible solutions!

[margrietonland]

unbelievable! I already had an appointment with Electrolux for a repair, but this works thank you thank you thank

[falcondj]

Yes found the tube was loose but was actually a support spring that broke which dropped drum lower. Bit of a pain put spring was cheap but took 2 hours to fix at my newbie rate.

[clarescott]

Thank you from Australia. Fixed my E10 problem. Cheers.

[johannesbrundin]

Spot on, you were right, the tube was loose. Best clip on YouTube, when you need it. Tusen Tack!

[fuur]

Man...you really deserve an OSCAR! 🏆! Came home from vacation yesterday and wasn't able to wash! Killed my saturday evening and im a skilled craftsman! But this f#*%ing hose...i would NEVER think of this! NOW everything is fixed! Sunday sports done 😆...APPRECIATE A LOT!!! Thx 👍🏼

[vitjuha]

I was dissappointed when i saw my hose was right where it should be, but then i saw one of water intake valve socket broken, the wires were disconnected and just hanging, i did connect them and now my machine works fine! thanks!

[trlandet]

Worked perfectly on our AEG Protex Lavamat from 2008. 3 minute fix! Tusen takk!

[ramilnuretdinov]

Thank you! I had the same problem: error E 10 and water coming. I had the hose which came off at the same spot. Now it works.