Easiest Famicom AV mod

@ScruffyLookinRGB

#famicom #nes #retro gaming

In this video I will show you how to easily mod your Japanese Famicom with out having to drill any holes into its shell. I give comparisons of how an RF and AV signal differ on a newer television and take you step by step on how to perform the mod from start to finish. With this method you get to keep the original RF functionality and 100 percent of the original Famicom aesthetics. This is a good option for those who like to keep retro consoles as original looking as possible. This is an option to drilling into the shell of the console and adding AV out puts. In this mod we will install a trrs female port and run the wires through the same port as the player 2 controller bypassing the need to drill or cut into the classic Famicom design.

👍Hit the like button😁

🔥Subscribe to my channel

🔎Follow me on Instagram

🔎Twitter

(Non-affiliate Links provided)

Time needed: 25-30 min

Parts:
-Famicom

Board Ver. (HVC-CPU-GPM-02)

- ribbon cable
-Video Capacitor 47µF 16V
-Audio Capacitor 220µF 16V
-resistor 120 Ω 1/4 W Takman
-Ceramic Capacitor 1µF

Components came from:

🔧Tools:

[gonebloodypsycho]

Did this a month or so after you uploaded, still 10000% the easiest, cheapest way to av mod and it keeps it the most original. Thanks for the video, it helped tons!

[atsurokihara]

You need to put actual content into your shorts. Not just a cut out of your video. And even this section could be a lot shorter and to the point