How to Set Up COOSPO BK805 Speed and Cadence Sensor?

preview_player
Показать описание
Integrated with ANT+ and Bluetooth technology, the BK805 cadence and speed sensor wirelessly transmits your speed and cadence data to compatible bike computers or cycling APPs simultaneously to help you monitor your cycling performance.

Where to buy:

Subscribe to the COOSPO video channel:

Follow us:
Рекомендации по теме
Комментарии
Автор

Hi, does the battery need to be removed when the unit is not in use?

anindyatanisha
Автор

I have purchased the BC107 and the BK805 for a Giant Escape 2 Disc bike, and the cadence sensor is 19mm away from the magnet because of the crank set up . 1.) the Crank arm is hollow on the inside so the magnet has to be fitted higher up where it is solid18mm from the bolt. However, the bigger issue is the distance from the crank to the frame is approximately 17mm so the distance to the BK805 sensor unit its 20mm NOT less than 12mm as recommended. Please can you advise how I can get this to work. I purchased both items from Amazon.

MarkBrown-lbwy
Автор

Good video to help set it up. I managed to connected the first time, but when I finally had the time to ride it wouldn’t connect or turn on. 😭😭 it won’t even find it on my tablet or phone. I thought it was the battery that came with it but it turns in when I push the battery down. Not sure what else to do to get it to turn on. Any ideas?

SweetCreationStudios
Автор

Just got this device but cannot get it to connect to zwift no matter what i do. Works fine with the coospo app tho. Any tips would be great.

lennypong
Автор

I like the vid helped to set me up quick. Where are you riding at the end of the video? It's stunning!

alekssaric
Автор

Is this much better than having a dedicated coospo speed and cadence sensor?

KingDaChaser
Автор

does the distance from the wheel center that you place the sensor matters? if I put it closer to the wheel center the speed is faster than if I put the sensor far from the center?

thiagoambrosi
Автор

COOSPO bk467 has delay in measuring cadance or speed about 3 seconds. Do COOSPO BK805 have the same delay or shows speed (candance) in real time without delays?

dikiyserge
Автор

Hi I have the BC107 and the sensor in this video but the sensor is not connecting to the device. I’ve successfully connected the sensor to the app. Please help

davidgachuz
Автор

How do you wake the sensor up? I installed mine but when I went to use it, it didn't connect. Surely you don't have to take battery out every time?

judep
Автор

Is this more accurate than BK467? Planning to get this one

markkeavin
Автор

The speed sensor does not work. Won’t tell zwift my speed 😢😢😢😢😢

AFFootballHighlights
Автор

Can I use this to read speed and cadence if I install this to a Mountain bike attached to a bike trainer?

zubairahmed
Автор

Possuo um IGS520 (IGPSPORT) e costumo ter problemas com sensores instalados na roda traseira quando estou em velocidade alta pois o gps fica na mesa e em alta velocidade o sinal vindo do sensor instalado na roda não alcança o gps. Este sensor possui este problema? Meu GPS conseguirá receber o sinal mesmo quando eu estiver em velocidades mais altas?

pedalandocomamonark
Автор

Did anyone try it with Rouvy? I just ordered it, especially for it.

MartinPoirier
Автор

Is it no normal that the sensor works when it wants ??i mean it was working and suddenly stops works gives no signal at all!!

UlissesGuimaraes-kosq
Автор

Добрый день, подскажите пожалуйста как подключить Coospo bk805 к компьютеру, чтоб видеть датчик скорости и каденса... в программе Zwift на компьютере?

VovchikVS
Автор

Do i need to remove the item if im going for a bike wash?

jeprox
Автор

This device works with smartwatches running Wear OS by Google? What apps it works?

llbrunoll
Автор

How can I install that on a spinning bike?

rubaalmussa