You can finally ditch the glue stick…

[hotfix]

I picked that glue up when I was at 3D Printopia and it works really well (I got the one with the wide applicator). The only downside to it so far is it smells like dirt (as in soil), and that smell transfers a little to the bottom of the prints, but believe I have been successful in getting it off the prints with water and a paper towel after.

[kayhan]

Textured pei plate of Bambu doesnt need glue for PETG 😂, just let the plate cool before removing your print. For refrence look on the details of the textured pei plate on the bambu shop.

[coylkoupourbinbarger]

There is no reason to use anything, all it does is waste your money, cause a mess and if your still doing the things that actually lead to poor bed adhesion such as improper bed leveling, wrong nozzle temp, wrong bed temp, too fast, improper orientation and/or settings in your slicer then you will still have failed prints. I've been printing for years on a multitude of different machines and filaments and have never had an issue, don't waste your money on junk that destroys you perfectly good glass or magnetic build plate, take the time to properly dial everything in on the printer and the slicer and you will be able to slice a model, hit print and then without even needing to monitor it come back to perfectly finished print every time.

[vash]

I don't use for petg just let it shouldn't have adhesive issues on Bambus