How to Get Lacing/Cells with Resin

To create a board with epoxy resin, you can follow the following steps:

Prepare materials: You need to prepare a piece of wood or other hard material to create a base for the board. Ensure the surface is flat and clean.
Mix resin: Following the manufacturer's instructions, mix epoxy resin and hardener in a large container. Make sure the mixture is well and thoroughly mixed.
Add color (optional): If you want to create a color effect or unique design, you can add color to the resin mixture.
Pour resin onto the board: Pour the mixed resin onto the surface of the board. Use a brush or spatula to evenly spread the resin over the entire surface.
Remove air bubbles: Use a heat gun or brush to remove air bubbles if they appear on the surface of the resin.
Wait and let it dry: To allow the resin to dry, make sure to create conditions for the resin to dry evenly and without being contaminated by dust or dirt.
Finish: After the resin has dried, you can clean the surface and apply a protective coating if necessary. Note: Always follow the specific instructions from the manufacturer of the resin product you are using to ensure safety and the best results.