Smith Chart Impedance Measurement With NanoVNA

preview_player
Показать описание
Created by InShot
  1. Bruce Carter
  2. #inshot
Рекомендации по теме
Understanding the Smith 0:10:19

Understanding the Smith Chart

Smith Chart Impedance 0:08:31

Smith Chart Impedance Measurement With NanoVNA

ECE3300 Lecture 12b-6 0:04:23

ECE3300 Lecture 12b-6 Smith Chart input impedance Zin

Smith Chart Input 0:03:57

Smith Chart Input Impedance - Lesson 5

Smith Chart Basics 0:05:13

Smith Chart Basics + VNA Paperclip Test

#282: Part 1: 0:04:44

#282: Part 1: How to measure complex impedance with MFJ-259B | determine sign of X

#274: Smith Chart 0:11:30

#274: Smith Chart Basics: Impedance and Admittance curves and conversion

The Impedance Smith 0:04:16

The Impedance Smith Chart - Lesson 3

#276: Smith Chart: 0:11:48

#276: Smith Chart: Design an L-Network - Impedance Matching Circuit

Understanding VNAs - 0:07:22

Understanding VNAs - Cable Impedance Measurements

#297: Basics of 0:24:59

#297: Basics of the Smith Chart - Intro, impedance, VSWR, transmission lines, matching

Measurement of an 0:08:35

Measurement of an Unknown Impedance using #smith #Chart

To measure an 0:04:12

To measure an unknown impedance using smith chart.

#1472 Cable Test 0:08:41

#1472 Cable Test on Smith Chart

#316: Use NanoVNA 0:15:47

#316: Use NanoVNA to measure coax length - BONUS Transmission Lines and Smith Charts, SWR and more

#275: Smith Chart: 0:15:07

#275: Smith Chart: Z, VSWR, Reflection Coef and Transmission Line Effects

How to calculate 0:05:47

How to calculate load impedance from input impedance using smith chart ||Transmission LInes||

#325: Use NanoVNA 0:08:21

#325: Use NanoVNA and Smith Chart to show effect of adding transmission line length

ECE3300 Lecture 12b-7 0:05:01

ECE3300 Lecture 12b-7 Smith Chart load impedance

Lecture07: Impedance Matching 0:37:12

Lecture07: Impedance Matching with the Smith Chart

Smith chart for 0:15:02

Smith chart for Impedance measurement

Single shunt stub 0:11:53

Single shunt stub matching network using smith chart by Dr. Niraj Kumar VIT Chennai

Smith Chart: Given 0:04:09

Smith Chart: Given Load Impedance, Find Reflection Coefficient

#349: Club Presentation: 0:54:49

#349: Club Presentation: Smith Charts - the NanoVNA and your antenna - matching network design

Комментарии
Автор

There are two other methods of measuring impedance. The method shown in this video is most accurate around the 50 ohm point (S11). Putting the component in series between Port 0 and Port 1 is used for higher values of impedance, and the shunt, whereby the Port 0 and Port 1 are connected straight thru, and the component is connected from that straight thru to ground. Mostly used for less then 50 ohms... W0QE has an excellent video on this very subject. "Three methods to measure impedance with the NanoVNA".. Thanks for the video

wbond
Автор

Hi Bruce, thanks for that. It was very helpful. Please can I ask where you got that SMA component tester PCB.

Patnetpatnet
visit shbcf.ru