Mustool MT8208 Oscilloscope Multimeter Review

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

Thank you! It turns out that the instruction book for my ET 828 had the correct instructions concerning the leads. I think your video is of great help to new users of this meter such as me.

martytoo
Автор

If you switch the scope in AC mode it'll show the correct graph (squarwave). Another thing to mention is holding F4-key while turning on will turn off the key beeps.

patricknitzsche
Автор

I found that the 'scope works best if range switch is set to ACV. When set to DCV it has poor compensation, giving the distorted square wave seen in the video. Note that even with the switch in ACV position, the scope input is DC coupled, so it can be used to measure both AC and DC voltages.

hoomanbustani
Автор

did your catpassitor check good lol???

sinfulfi
Автор

The cat was the highlight of this video, I will love him forever

albertolaurella
Автор

Well who'd have thought that aye. Stick the probes were you don't normally expect them to go 🤣
Thanks for the heads up Jeff. I'll take another look at mine when I get a chance.
Cheers
John

OrbiterElectronics
Автор

Is there a better multimeter oscilloscope model available in 2021? I just want a cheap oscilloscope

flab
Автор

One of the worst things about the 8208 is the scope's ranging: It goes 1-3 instead of 1-2-5 like every other scope[meter]. This often makes it impossible to fit the viewed waveform in the display window for a good view. It also makes it very difficult to read fractions of a division, as each subdivision is now 3/5 = 0.6 units.

hoomanbustani
Автор

I am shocked i have been following you for some time and this is the second video that told me that you have new videos.
I am back into the automotive repair work again as well as doing more automotive electrical and a couple of other fixes one being a 55 inch HDMI cable port being fixed now the station i have is like a cheap 100 dollar one good for basic wire tining and light repairs.
Takes way to long .
I have a bunch of clusters that I want to start fixing and or selling reprogramming odometer and LEDs repair. I have done stepper motor replacements but takes forever with the cheap station i have.
Any suggestions and if you have made a bench top tour yet.
I did watch the new video of that china station and was actually looking at buying that one tell i got to the end and said nope.
Thanks for the videos helps keep my mind thinking!

maxvolovich
Автор

Hi, it would be very helpful if you show how the mustool 2807 videos works during automotive applications

terrencecarter
Автор

Though I am still glad I bought the 8208, here is another problem with it:
The probes it comes with have tips that are narrower than standard probes. If used with another meter, these probes make poor / intermittent connections.
Likewise, the probe sockets on the 8208 meter are extra-narrow, making it very difficult to insert and remove standard banana plugs.

hoomanbustani
Автор

Hi, are there any automotive videos using the 8207 mustool scope functions like testing sensors or any other diagnostic misfires, secondary ignition testing.

terrencecarter
Автор

Defective "manual" Thx for the follow up. 😏

KeepOnTesting
Автор

I’m glad you tested a Banggood product. I am leery of their products. At least I know those meter works and is fairly accurate. I am also glad the meter was not defective Thanks for the review

rickchowsr
Автор

I like your review, especially clarifying the capacitor testing (mf) with the different jack. I am glad it works. And the capacitor update needed to the manual. All that originally held me off (partially) from the purchase. Now it hasn't. Do you possibly still have the special pricing around $50??

howardpollack
Автор

Did the kitty test the meter? I love the fact that you put the cat in the video! GREAT VIDEO!!!

OrganNLou
Автор

welcome back ! hope you are alright ??

annierenard
Автор

Is the oscilloscope good for laptop repair?

dgm
Автор

I would say its great for mechanics and in the field work. I will stick to my siglent for the bench. I do like the idea of it for my tool bag in the truck though. If someone is really tight on the budget for bench scope look at Owon and Hantek. If you spare an extra 50-100 look at siglent and rigol. Real endorsement at the end. "ehhh Hey its not bad"

FixedUntilBroken
Автор

What Model Unity meter do you have? can't see in the video

Inavato