Using the Yongnuo YN560-TX Wireless Controller with YN560 III & YN560 IV Flash (Product Review)

[Reurbo]

I know I'm a visual learner and after getting my YN560-TX and twin YN560 IV to start using I was dreading going through reading manuals for the transmitter and flash units on how to do anything with their setup and sync. This video got me up and running in minutes and I thank you greatly for that! I've got them both synced to to the transmitter and each in their own group for individual configuration. Great video!

[albertosantos]

Just bought two Yongnuo 560III's with the TX myself so I can have an affordable Off-camera lighting setup. It is a fantastic option for photographers trying to avoid burning a hole in their pocket. This guide was extremely helpful and thorough. thank you very much!

[Brkz]

this video was a life saver, I was panicing thinking my 560IV didn't work with the 560-TX II but I just didn't know I had to set my flash to RX mode

[justwillc]

Can't see what's so complicated. Really straight forward and clearly explained video on how to use these. Grouping always sounds difficult but once you've done it a couple of times, it's easy peezy. I'll be looking out for a set.

[nfjbt]

THANK YOU FOR THIS VIDEO! I finally have all 3 of my units working together! 2 560 IV and 1 568 ex II

[rodrigopessoa]

Simply the best video of this topic in youtube! Congrats and thanks a lot.

[nune]

HEY! A video that gets straight to point without much filler crap. Good stuff man.

[mrentertainer]

Thanks for this video. You have clearly defined how to activate the flash with the YN560-TX - I was having difficulty performing the activation. Thanks again

[chasingwaves]

I just tested my YN 560 gear and flash controller today ! Wow worked great did a 2hr photo shoot used Good rechargeable batteries in the flash and regular batteries in the flash controller 👌🏽👌🏽👌🏽 definitely buying another flash !!

[ChrisBlumenshinebellissimofoto]

For those of you that have 560 III and don't see a group icon on your flash. DO THIS:


* Make sure both the TX and your strobe are turned on. (I would do each strobe one at a time if you have more than one)
* Now on the TX, press the Zoom/CH and Hz/FN buttons simultaneously.
* The 560III strobes screen should show a scrambled screen as shown in the instructions. Press the OK (center button on the multi-selector) on the strobe.
* On the strobe you should now see a new Gr [ ] box under the Ch [ ] box showing the strobe assigned to group A.
* To change the Group on the strobe, press the MODE and Flash/wireless buttons simultaneously (the two buttons with GRP between them.
* Use the up/down multi-select buttons to cycle through the groups.

[taralowe]

What if you want to have an on camera flash as well? Do you have to have the controller on the hot shoe in order for it to work? This would be convenient if I could keep the  controller in my pocket and change the settings, without having to have it on camera.

[RobynASDxxx]

Bought a yongnuo yn560 III from you guys last week, it arrived today, along with the TX controller, it works like a dream; i have kaavie triggers which are terrible, they misfire so much, go out of range within mere feet, so practically useless in realworld shooting, but already this unit has impressed me, and until my rf603's arrive, i will be triggering my other yongnuo speedlight (yn460 II) optically, which also seems to work faultlessly.

Personally i think calling these "disposable" is an injustice, most speedlights are made in china anyway, so all these "concerns" about quality are not really valid.

[thewelsho]

Love this. A great product for very little money and a thoroughly helpful tutorial! Thanks!

[songyihan]

Thanks for your Video!
Unfortunately my tx-ll can't control the flash(560-lll). It can receive the sign and flashes but i can't change the power or zoom. Don't kbow which one is wrong flash or transmitter 🤔

[YourNewHappyPlace]

I have 2 yn560iv and the yn560tx. When I change the mode so the flash does not fire "--" the tx and the flash both show "--" but when I hit the test button, they both still fire. Also one of my flashes has the red front led that flashes and the other does not. Any ideas? Thanks

[HadiKnowledges]

Can i control yn560iii/iv with godox X1 triger?
Plesase answer

[deqkuanggl]

What if i dont want to use flash trigger? But i still want to use two flashes.can i do that?

[derron]

so you don't need the tranceiver for it to work then off camera?

[bobing]

hello. i have i Nikon d610. i booth one yn560 VI a year ago, and i just booth another VI and the transmiter TX.. for some reasons the old one doesn't Connect to the TX. any sugesttion? thanks :(

[shibink]

Can this combination of trigger and flashes(yn3 and yn4) used for any brand like nikon, canon etc?or the trigger is made only for a particular camera brand?