BEGINNER Laser Engraving and cutting tutorial with the Sculpfun S9

This week I'm diving into the world of Laser Engraving and cutting with the Sculpfun S9. This video is designed to help anyone who is a total beginner or amateur and looking to get into Laser engraving or cutting. The video will walk you through the steps of setting up the Sculpfun S9 and the process to install LIght burn along with test engraves and settings. With this video you should be up and running within the day. Below are helpful tips about framing, starting points and videos I used to get going.

Check out what tools and gear I in the Small Fry Workshop:

Helpful Videos:

Skip Ahead
0:00 - Intro
1:04 - Unboxing and construction
2:22 - Software install
3:53 - Test engrave
7:33 - Logo Engraving
9:05 - Logo Cutting 3mm plywood
12:16 - Logo Cutting 10mm
13:29 - Quick Tip 1
14:01 - Quick Tip 2
15:34 - Quick Tip 3
16:08 -Wrap Up

---------------------------------------------------------
Happy building and if you like to stay up to date with what I'm currently working on be sure to follow me on social.
_______________________________________________

Amazon Affiliate Links for Tools and Gear I use
AUSTRALIA:
Tools
Camera Gear

USA
Camera Gear

FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links, meaning I will make commission on sales you make through my link. This is at no extra cost to you to use my links/codes, it's just one more way to support me and my channel! :)

MUSIC:
––––––––––––––––––––––––––––––
Music from Uppbeat (free for Creators!):
License code: ONWB97JJ0WICCQ6V
––––––––––––––––––––––––––––––

[danatassler]

Found this video completely on accident while shopping for a beginner engraving/cutting laser. This is not only the exact sort of product I was after, but your video is great. Simple, informative. Thanks!

[riaannel]

Another tip on the FIRE button: Hold Shift down and press FRAME, and it will enable the laser and trace the outline area of your work (in a square / rectangle) so you can see that your piece is lined up properly. I got my S9 a month ago, and I LOVE it !!

[woodknack]

This is one of the best beginner videos I have seen for the s9. You hit the very important starter things to know in lightburn. Thank you.

[monkeysausage]

So close to pulling the trigger on the S9. Very glad you uploaded this, given me some confidence that ever a chimp like me can get great results.

Thank you.

[ronnieholloway]

Just got a nice laser engraver. Been sitting here trying to figure out my next step after unboxing. Your video has been the best guidance I’ve seen so far. Super simple, great delivery, and tips were great. I look forward to what else your channel has to offer. Thank you

[alanmansy]

Brilliant video. Just got my S9 and have assembled it, but I found the recommended belt tensioning was way off the mark and the X Beam (laser gantry) kept sticking or catching as it went on its travels, but following your guidance and advice, it now runs like a “well oiled machine” and is as smooth as silk. Yours is certainly the most helpful video on the S9 that I have found. Thanks for posting it.

[SovietFrontier]

What a great video with a rare POV from a newbie doing it live. Great idea. That's how we all are in the beginning.

[roberttemple]

she has a wonderful way of presenting. She shows (nice and slow) where she is in the software, as an example, so I could catch on. Thank you!

[OzarkArtsandCrafts]

Very good review. Am now considering this model for my shop. Thanks.

[smackchowder]

I have the s9 and love it. Even had a problem with one of the stepper but Sculpfun replaced and customer service was very helpful. I also got the extension which is worth it as it adds quite a bit of size. I would highly recommend it.

[goman]

I have been thinking about getting a laser engraver for some time now. Your video was exactly what I needed to help answer many of the questions I had about an engraver and how it works. You did an excellent job of explaining the good and bad points about owning a machine like this. Thanks again for putting together this video.

[frstwlf]

Loved the whole video. Especially the 3 tips at the end. Been asking myself how will i know if the laser will cut on the right area. Can't wait to get my hands on this beauty. Thank you!

[RaplimNaim]

Just unboxed my S9 and your tutorial made everything so clear! Ready to start laser engraving and cutting like a pro. Thanks! 🔥

[kennethfiati]

i really enjoyed watching the workings of the Sculpfun S9 engraver

[stevelong]

OK, Small Fry. You were such a joy to watch. I actually turned on notifications just to see what you're up to next. I absolutely loved this video. At 62, I just purchased a stupidly large laser engraver. It's 150 watt 6 1/2 feet wide by 5 1/2 feet deep. I made my own cnc machine. You were the first video I clicked on. I do have a little background in IT. 2 degrees and a handful of certifications. You are a breath of fresh air. Love how you mention your mistakes and what you did to correct them. Perfect. I look forward to your future clips. I'll be doing a marathon on previous videos of yours. Keep going, kid. Your amazing

[kevinthegerman]

Excellent video, many thanks. Just assembled my laser machine and sat here scratching my head. You've probably given me all the pointers I need and I'll be having a rummage through your other videos.

[sigh_of_the_times]

Very good my lady.
I'm going to watch it a couple times.
Thank you 👍

[Diffy]

Video was suggested from another video and did not disappoint and great to see an Aussie, now I want one of these lasers

[youroutdoors]

Great video, I am doing research for a future purchase and your input has been very helpful. I love your excitement and the way you get to the information you are wanting to get out without too much talking about nothing like a lot of youtubers do.

[laragoldman]

This is exactly what I was looking for. I'm not using that brand, but I needed to know about going from zero. I'm in Belize, there's no way I'm going to find the base thingy either, so super appreciative of the tips and hacks!!