4 in 1 Multi Welder (MIG, TIG, MMA) - HITBOX SYN MIG 200 PRO | Unboxing and Test

This welding machine features: Manual MIG welding, Synergic MIG welding, Flux-Core welding (no gas), Lift TIG welding, MMA / Stick welding. You can weld a lot of different materials such as steel, stainles steel, aluminum, copper,...

00:00 Unboxing
01:29 Synergic MIG Welding Steel
05:05 Synergic MIG Welding Stainless Steel
07:31 Synergic MIG Welding Aluminum
09:23 Synergic MIG Welding Copper
10:27 Flux Core Welding
11:11 Lift TIG Welding (Steel, Stainless Steel)
14:05 MMA / Stick Welding

Thanks for watching. Subscribe for more!

[rbsjejq]

Thank you for a very competent high-quality video, I am far from a non-professional in welding, and my daughter became interested in arc welding, she is embarrassed by her hobby and trying not to miss your videos, she will master the ceiling. Thank you for your help, waiting for your new video 👍👍👍👍👍🖐️

[carphead]

Hi I bought the 200ii, any idea which Tig torch will fit, the plugs seem larger than average. Thanks.

[michaelcastro]

What recommend brand multi weld parkside hitbox decapower or many other brand?

[abdulrazaqalyami]

Thank you very much sir for this great review, it helps a ton.

[thomasmuller]

The good news IS that a lot of spare parts are generic so you can buy them on others markets.
Standart key hole wheels (OD 30mm, ID10mm, width 10mm), mb15 torch parts...

[hectorr]

EXCELENTE VIDEO¡¡... SALUDOS DESDE MEXICO¡¡

[luisa.mayorga]

Hello friend, I wanted to know what your experience has been with the welding machine and if you recommend I buy it?

[kenken-srvq]

What is the difference between HITBOX SYN-mig200 pro mig welder and the synergic HZXVOGEN HBM2280 mig, both look identical in programming?

[kirkstinson]

Would be nice if you cleaned the welds you are showing. And what about penitration? No snap test ir at least a butt weld so we can see

[ANDY-wemr]

Are there any good on mig tig and mma welding

[fatihalpatolye]

harika makine umarım bizede denemek için bir gün gönderirler

[michaelramos]

Hi, This is the same machine I got for Christmas! I'm new to the various welding techniques, except stick. The manual leaves a lot to be desired! What is the capped mig output used for? Any info you can give me I would be greatly appreciated. Thanks and keep up the great videos!

[giovannymunoz]

Tengo una hitbox 200 amp, mig, tig MMA ❤️

[georges]

Thank you but you didn't show us if it support lift-arc (spot welding) which is what many need from TIG welding (cold welding)

[huseyinalgur]

Slm ben sizin bu makinanın fiyatı nedir acaba Türkiye Eskişehir de gönderim maliyeti nedir acaba

[michaelramos]

Hi again, Another question. What tig torch should I get for this machine? Thanks again! Also, can you suggest a good all around book that would be good for a beginner?

[thomasmuller]

Hello,
I use this welding machine since 4 months now and I would like to give you m'y experience.

Like always with afordables chinese tools, the accessories are poor quality (gas tube, hammer).
The graphite wire feeding is well made. There IS 3 wheels wire feeding (0.6 to 0.8 and 0.8 to 1mm Vshaped for steel wire and a 1 to 1.2 mm Ushaped wheel for aluminium). You need to buy Kshaped wheels to experience a better flux core steel welding.

Functions :

- TIG lift is usable but without a gas electrovalve regulation or high frequency starter, its not very usable for stainless steel or wathever.

- MIG MAG IS quite good with synergic mode or manual mode. The welding IS great even if there are some parameters you need to adjust according to your welding position.

The wire roller system with only 2 rollers does well with 1kg and 5kg wires. BUT you need to clear thé system often to keep it safe.

- no complains with MMA, good penetration, arc stability and take off with rutiles sticks (basics sticks require a larger U0 than thé machine has but it works nowadays).

Spare parts are lacking on hitboxweld website distribution (for example, there's no wheels, no gas diffusor and no parts replacement for thé machine).

To conclude, I think this IS a good welder if you compare welding quality and cheap cost and if the welder keeps working after Time pass.
I dont think it will last 20 years like my old SAF fro AC MMA welder but today inverters have a lot more electronic parts so its natural they suffer more.

I own another hitbox welder, a 200A pulse TIG with HF which last since 2 years (approximatively 200 hours welding) and works well on stainless steel even if arc stability under 30A IS worse than an esab, Miller or lincoln professionnal TIG.

[mohamedhadi]

اين توجد نقاط البيع . في الجزائر . شكرا

[StigBjork]

My example works well with MIG-MAG for cobalt steel and I have also tested it with FLUX core which was ok but I don't like FLUX as it pops and smokes. I have not tested aluminum as it requires too much fixing. In contrast, the TIG LIFT system is totally useless. I have been chatting with Hitbox for 2 weeks and they are completely clueless about how a weld works. They send a video that shows how to handle/set up the welding for LIFT. Totally worthless, they have to dab the tungsten electrode (which is blunt!) a lot of times before they ignite. They increase the Amp setting to get the welder's recommendation to over 130 Amps

[christcombiccombichrist]

Hi make and test. I bought one of this hitbox SYN mig 200 pro welder. Mine's did not come with the tig torch, so I order one but the input end is too small for the connection port. I don't know where you get yours. I'm asking if you can provide me a link for one. Or where can I get it. Can I also get the dimension and the measurement for it and a code number if it has any?.