filmov
tv
How to use the XBee Module with Arduino in Proteus
Показать описание
!!! LINKS IN THE DESCRIPTION !!
Proteus Version: 8.6
Any datatype can be sent using the UART interface however in this video I have only shown how to send 16-bit integers. Data from sensors like DHT11, BMP180, etc can be virtually "transmitted" and "received" by the XBees.
NOTE:
1. The COM Ports must be paired before starting the simulation.
2. In real life, the XBees are to be connected TX to RX and RX to TX however while using the XBee Library in Proteus connections to be followed are TX to TX and RX to RX.
Links:
Arduino Code for Transmitter and Receiver:
Eltima Virtual Port Driver ( For COM Port Pairing) :
Proteus Version: 8.6
Any datatype can be sent using the UART interface however in this video I have only shown how to send 16-bit integers. Data from sensors like DHT11, BMP180, etc can be virtually "transmitted" and "received" by the XBees.
NOTE:
1. The COM Ports must be paired before starting the simulation.
2. In real life, the XBees are to be connected TX to RX and RX to TX however while using the XBee Library in Proteus connections to be followed are TX to TX and RX to RX.
Links:
Arduino Code for Transmitter and Receiver:
Eltima Virtual Port Driver ( For COM Port Pairing) :
0:05:48
XBee: The basics
0:13:41
XBee Tutorial | How to use XBee with Arduino for ZigBee Communication | XCTU Software Setup
0:13:38
How to configure the XBee Module & Communicate between them- Live Testing
0:10:25
XBee Basics - Lesson 1 - General Information and Initial Setup
0:01:07
Data transfer using Xbee module
0:16:54
Getting Started with the Digi XBee 3 ZigBee Mesh Kit
0:01:10
How to Use Xbee and Arduino to Display Temperature on LED Crystal Display
0:12:55
XBee Tutorial: Configure ZigBee in API Mode
0:10:22
Arduino and Xbee Series 2 (not Series 1) Configuration
0:04:10
XBee® Zigbee Cloud kit - Another Geek Moment | Digi-Key
0:17:14
ZigBee based Wireless Sensor Network using XBee S2C Module
0:11:52
ZIGBEE XBEE-S2C -How to configure
0:07:32
Working with XBee Radio Modules in XCTU and GPS Modules in Three Different Programs
0:04:47
Range Testing XBee Radios Transmitting GPS Data
0:05:37
Mastering XBEE - Lesson 5 -Level Shifters
0:04:04
4-Channel, 2-Flavor Remote Control with XBee or nRF24 radio modules
0:03:23
Digi XBee Tools
0:06:06
Tiny Tutorials: Super Simple XBee Wireless Communication
0:31:53
Introduction to XBee Technology
0:08:49
Introduction of ZigBee XBee S2C Module with Detail Explanation
0:06:59
Mastering XBEE - Lesson 7 - Addressing Modes & AT Commands
0:12:09
Tutorial: How to Setup configurate Xbee Devices (Hard and Software) with an Arduino HQ Part 1
0:01:48
Programming Arduino for Xbee
0:04:21
Mastering XBEE - Lesson 1 -Getting Started
Комментарии