filmov
tv
How to use NCK Pro Box to backup Qualcomm Android firmware
Показать описание
This video explains how to use NCK Pro box to backup the firmware of a Qualcomm Android device
Drop a comment below if you have questions or reach out to us on the following platforms:
00:09
In this video tutorial, I'll be explaining how to backup or dump a Qualcomm Android phone's firmware
00:15
using NCK box Qualcomm module. You need to have the hardware box and have set it up.
00:22
We have a guide on how to do that. Then you need to install your Qualcomm drivers. After which you
00:27
download and install the NCK box Qualcomm module setup. Once you've installed this module,
00:34
launch it and wait for the dashboard to come up. It often takes a while depending on your PC
00:45
so you just have to be patient for it to come up. Alright! Great! Mine is up. [resizing]
00:57
Now what you'll want to do is to click on Firmware Utils then click on Dump Firmware.
01:13
I'm not going to tick Dump Raw Userdata because I don't intend to backup userdata partition. I you intend to
01:19
then tick it. At this point, you power off the device, still with battery inside, hold both volume buttons
01:27
then connect it to the box via the USB cord and wait for it to get detected. Alright! I have detection here
01:36
phone's details are being displayed [resizing].I have modem as the first partition being backed up.
01:53
You just have to wait a while for the backup process to be completed. Its very important you don't interrupt
02:02
this process by disconnecting the box or the device from the box. Its phone to box and box to PC in NCK.
02:21
Checkout our setup guide, that will explain how to go about the connection. I have other partitions being
02:32
backed up currently. I did not tick dump raw userdata because that's a very heavy partition.
02:43
If you want to backup userdata, make sure you tick Dump Raw Userdata before you click Dump Firmware.
02:50
The heaviest partition I'll be backing up is system. After boot, I should have system backing up.
03:10
[pausing video recording once system starts backing up]
04:11
Alright! Great! backup is complete. You can check the Saved to folder for your dump.
04:21
That's basically how to backup or dump a Qualcomm Android phone's firmware using
04:27
NCK box Qualcomm module. --------------------------
Hire Or Consult Us
Join Our Training
Drop a comment below if you have questions or reach out to us on the following platforms:
00:09
In this video tutorial, I'll be explaining how to backup or dump a Qualcomm Android phone's firmware
00:15
using NCK box Qualcomm module. You need to have the hardware box and have set it up.
00:22
We have a guide on how to do that. Then you need to install your Qualcomm drivers. After which you
00:27
download and install the NCK box Qualcomm module setup. Once you've installed this module,
00:34
launch it and wait for the dashboard to come up. It often takes a while depending on your PC
00:45
so you just have to be patient for it to come up. Alright! Great! Mine is up. [resizing]
00:57
Now what you'll want to do is to click on Firmware Utils then click on Dump Firmware.
01:13
I'm not going to tick Dump Raw Userdata because I don't intend to backup userdata partition. I you intend to
01:19
then tick it. At this point, you power off the device, still with battery inside, hold both volume buttons
01:27
then connect it to the box via the USB cord and wait for it to get detected. Alright! I have detection here
01:36
phone's details are being displayed [resizing].I have modem as the first partition being backed up.
01:53
You just have to wait a while for the backup process to be completed. Its very important you don't interrupt
02:02
this process by disconnecting the box or the device from the box. Its phone to box and box to PC in NCK.
02:21
Checkout our setup guide, that will explain how to go about the connection. I have other partitions being
02:32
backed up currently. I did not tick dump raw userdata because that's a very heavy partition.
02:43
If you want to backup userdata, make sure you tick Dump Raw Userdata before you click Dump Firmware.
02:50
The heaviest partition I'll be backing up is system. After boot, I should have system backing up.
03:10
[pausing video recording once system starts backing up]
04:11
Alright! Great! backup is complete. You can check the Saved to folder for your dump.
04:21
That's basically how to backup or dump a Qualcomm Android phone's firmware using
04:27
NCK box Qualcomm module. --------------------------
Hire Or Consult Us
Join Our Training
Комментарии