Remote Handset Lifter for the ZŪM DECT Headset™ (initial setup)

Installing the Handset Lifter -

You will be placing the Headset Lifter on your phone so that the Ring Tone Sensor in the Headset Lifter is positioned over the speaker of your phone. The exact position of the lifter will vary phone to phone.

You’ll have to experiment to find the best place on your phone to physically lift the phone’s handset so that you can take the call on your Zum DECT Headset™.

You can adjust the height of the lifter arm by moving the up/down lever to the best height. The lever can be adjusted in 3 steps, from low to high, to lift the handset, based on the shape and weight of the handset. Test the lifter’s position by pressing the talk button on your Headset: you should be able to hear a dial tone if the handset is raised to the correct height.

Once you have found the best location, you’ll have to attach the lifter to your phone with the provided adhesive strips.If the Handset Lifter is not directly over the speaker of your phone you may have to plug in the optional extra microphone, provided. If it is needed, plug it into the jack on the lifter and place the microphone end on your phone’s speaker.

Plug the Connector from the Handset Lifter into the jack in the back of the Base Unit labeled “Lifter”.