How to Flush Automotive A/C Lines, Evaporator. and Expansion Valve

We flush the A/C lines in a Lexus IS300 during a compressor and condenser replacement project. Check the other videos and the list of parts below if you are doing this and need anything else.

You can buy that flush can on Amazon if you can't borrow locally from autoparts store.

----------
-------------------------
#ACflush #airconditionerrepair #accompressor

Disclaimer: "Tuner with Kids", the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and as an Amazon Associate I may earn a commission from qualifying purchases through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.

[worklab]

Am going to be honest, I'm surprised you release this video with so many errors, I mean that hose? High pressure? And you have it sitting on the bucket with no support.

[ozzstars_cars]

The 13:33 mark was the real deal. We've all been there. lol Good information man! -Glen

[DMS]

Use Coleman fuel. It costs less than half as much and does a bang-up job. It also evaporates quickly.

[Michael-hgsq]

I like the mod to the metering valve, making it a coupling while keeping the lines intact when flushing. Great demonstration, thank you! The mess is part of it because having clean lines is key.

[wellthenjayt]

Why did you need to drill the Expansion valve? Cant you just flush out the evap from the suction and the HP line behind the expansion valve?

[matthewfischer]

Shouldn't this be titled "How NOT to Flush Automotive A/C Lines"?

[KTranChannel-ffou]

I wish you could zoom in. It kinda hard to see whats happening exactly

[AlphaDetoxMedia]

I saw the mess coming before it happened. How hard is that crwp to clean up?

[mangoop]

Hey binh when you say drill out the hole bigger on the expansion valve. Do you just drill out the side walls of the hole and not touch the tiny little pin or do you drill out the pin inside the tiny hole also. Also what size drill bit do you drill it out into if you dont mind me asking.