filmov
tv
DJI Mavic Mini Firmware Update 2020 Unlocking Geo Zones | v01.00.0400
Показать описание
Jadi akhirnya DJI Mavic Mini memiliki update terbaru dengan firmware v01.00.0400 yang memperbolehkan kita untuk melakukan self unlocking Geo Zones di area yang dilarang terbang atau no-fly zones.
Sedangkan untuk area no-fly zones sendiri ada 3, yaitu:
1. Grey Zone/ Altitude Zone
2. Blue Zone/ Authorization Zone
3. Red Zone/ Restricted Zone.
Overview new DJI Mavic Mini firmware update
- Date: 2019.12.31
- Aircraft Firmware: v01.00.0400
- Remote Controller: v01.00.0400
- DJI Fly App iOS: V1.0.4
- DJI Fly App Android: V1.0.4
What’s new
- Added feature to unlock GEO zones (requires DJI Fly v1.0.4 or later).
- Added feature that disables takeoff when the GPS signal is weak (GPS less than 8) and the environment light is not sufficient. This feature can be disabled manually (requires DJI Fly v1.0.4 or later).
- Added requirement for compass calibration before takeoff when the environment light is not sufficient and the compass experiences interference.
- Adjusted flight altitude and distance in payload mode.
- Added warning prompt for battery cycles.
- Reduced noise during self-diagnostics after powering on.
- Fixed issue: linking was abnormal in some regions.
Notes:
- Note that the update may reset various main controller settings, such as the RTH altitude and the maximum flight distance, to default settings. - Before updating, take note of your preferred DJI Fly settings, and readjust them after the update.
- If the update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 for Mavic, and retry.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
GEARS IN THIS VIDEO
● Sony A6000
● Sony A6400
● Smartphone
● DJI Mavic Mini
● DJI Mavic Pro 2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SOCIAL MEDIA
Sedangkan untuk area no-fly zones sendiri ada 3, yaitu:
1. Grey Zone/ Altitude Zone
2. Blue Zone/ Authorization Zone
3. Red Zone/ Restricted Zone.
Overview new DJI Mavic Mini firmware update
- Date: 2019.12.31
- Aircraft Firmware: v01.00.0400
- Remote Controller: v01.00.0400
- DJI Fly App iOS: V1.0.4
- DJI Fly App Android: V1.0.4
What’s new
- Added feature to unlock GEO zones (requires DJI Fly v1.0.4 or later).
- Added feature that disables takeoff when the GPS signal is weak (GPS less than 8) and the environment light is not sufficient. This feature can be disabled manually (requires DJI Fly v1.0.4 or later).
- Added requirement for compass calibration before takeoff when the environment light is not sufficient and the compass experiences interference.
- Adjusted flight altitude and distance in payload mode.
- Added warning prompt for battery cycles.
- Reduced noise during self-diagnostics after powering on.
- Fixed issue: linking was abnormal in some regions.
Notes:
- Note that the update may reset various main controller settings, such as the RTH altitude and the maximum flight distance, to default settings. - Before updating, take note of your preferred DJI Fly settings, and readjust them after the update.
- If the update fails, restart aircraft, remote controller, and DJI Fly or DJI Assistant 2 for Mavic, and retry.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
GEARS IN THIS VIDEO
● Sony A6000
● Sony A6400
● Smartphone
● DJI Mavic Mini
● DJI Mavic Pro 2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SOCIAL MEDIA
Комментарии