Trouble shoot a Hoshizaki ice machine

Unit not making ice. No voltage to water inlet solenoid. Kml450mah

[tcphvacr]

They keep mistreating that ice machine, it's just going to cost them more dough. Ba-doom boom! Hope to see more footage on that roof top job, Dave. 🤞🏻

[jonhvac]

They converted it from an ice machine to a bread maker...genius

[aircooledtx]

Wow set unit and hoshi crap-out board. I have un-plugged them spray electronic cleaner and plug back in work fine. I have done this more than once Dave. They were stack units by front door of store, so got dirty for wind blowing dust inside ..

[williamloper]

The flower is for checking refrigerant leaks ! you know roll Her in flower to find the wet spot, there is lots of wet spots on miss Hoshi

[uxwbill]

Now there's someone who pushed their ice machine so hard to become a special flour. :-P

[phcapprentice]

i keep a 24v 40va transformer set up with a plug on the end of the high voltage. this allows me to test a gas valve, solenoid or anything that needs 24v for power.

[jorgemabarak]

Im assuming this is a round table considering it looks exactly like the pizza place i am watching this video out of haha

[IFIXCASTLES]

I work on these often. I see the ice plates lift away from the evaporator, the bin stat goes south, debris in the ice size control spring diaphragm, hot gas defrost valve goes of broken ice breaker in the impeller jamming the motor...there are others but these are common.

[abdiasgerardosolartemarqui]

I'm dealing with an ice machine that when I turn it off compressor keeps working, there is one relay that keeps sending power to the compressor, and I replaced the relay (old one), not sure if the old one is good. So, what may it happen? Should I buy a new relay or can be another issue?

[icemachines]

I fix ice machines too...I like your videos...

[jimbola]

u the man!!!! enjoy all your work keep it up have a nice 4th!!!!

[jamesmclaughlinprimitivele]

that hoshisaki is hosed, lol, bet that condenser is a brick

[yagotwrektm]

Great video dave. I was working on a KM1300 tonight. It goes into harvest as soon as the 5 minute lockout is over. I think I’m losing water through the pump out check valve but they ran the condensate line through the wall and no one knows where it’s terminated. I came to this conclusion because as checked continuity on the float switch as soon as the 5 minute lock out end and the switch was closed. I’d be curious to know your thoughts as I don’t work on too many ice machines.

[damianorsini]

dave, you were allowed to put that back on the wood? I'm not busting stones, just asking.

[jonhvac]

Stop the uploads Dave. I'm way behind y'all😹

[zack]

What is the max you want to read on a coil.

[eliseovalle]

I think I need to ayust water level over flow swicht ?

[Refertech]

If u come across a kold draft can u do a video

[edwardleas]

Bro just blew all that old moldy dough dust up in the pizza kitchen!
Endangered sea turtle.
Share: check out this awsome sea turtle man

[MiHeatingGuy]

is that flour in my ice it tastes like pizza