1JZ VVTI TUNING DRIFTMOTION TURBO E85

Tuning by Drive Auto Sports in Everett, WA
MODS
Stock motor
AEM Infinity ECU
Driftmotion turbo upgrade with billet compressor wheel and bigger exhaust wheel.
1050cc ID injectors
Radium fuel rail
Deatschwerks DW400 fuel pump
Future Fab elbow downpipe
J-pipe delete

First runs were without the VVTI Solenoid working. We replaced the solenoid and
picked up 50 torque around 3k RPM. 400 torque at 3k!
Next, we did a E85 tune. We didnt increase the boost at all(22psi). Just with E85 we made 444hp/423Ibft

[FullDetailAutomotive]

With these kinds of results, it makes you wonder why even go top mount. The driftmotion upgrade is incredible.

[lysticalz]

Thanks for the uploading this.
Def sold me on the ct15b Drift motion upgrade. Sending my turbo to Aaron and praying my trans doesn't blow lmao. stock w55 trans on my is300 btw.

[dr.hassanalibrahim]

Nice build and really nice number considering how small the turbo
. There is slight power drop at high rpm I believe that tomei 250/260 cams might be beneficial or going with bc 264 but you will loose some of the power at lower rpm . Sorry for my bad English

[thedpfteam]

Loving the channel loving the build! What ECU are you using?

[boostgoober]

Thanks for sharing! Love seeing the bottom mount make some power. Were you limited at 22psi or could you go higher?

[cmase]

Sounds great man, love it! I'm thinking of going this route over the winter. Any issues with boost control with this turbo? My experience with the stock turbo, future fab downpipe, and 3" exhaust is the wastegate doesn't seem big enough to regulate boost at higher load/rpm and it creeps from 12 psi to 15+ psi

[Tsho]

Hey numbers! Was wondering what psi you were at when you ran the 397whp? Was that still on 91? Looking at doing the same build for my car. Thanks

[saifkurdi]

You never posted part 2 for installing the drift motion turbo rebuild :(

[derpaderp]

Do you remember what your injector duty cycle was on those 1050cc injectors?

[ユリウス-hu]

Before you replaced the vvti solenoid, all the runs prior had no vvti?

What psi was the dyno run right before the solenoid pic?


Thanks

[hollywood]

Did you consider the Tomei 8280 at any point? What clinched this turbo for you?

[ejaazm]

Quick ? What issues was you having when you suspected the vvti solenoid bad ?

[lucasok]

how's the turbo holding up? also did you notice any lag compared to the stock?