Easy DIY Bolt On Boat Trailer Step For UNDER $100!! || Amazon Only Parts!!

On todays video I show you how to builkd a boat trailer step for under $100 using parts off of Amazon. It is simple to build and works great!! #bassfishing #bigbass #basstournament

Find the line I use here:
Promo code: 15% off with code GunnFishTV

Get 15% off with code GunnFishTV

Attribution 4.0 International (CC BY 4.0)

[RichZFishes]

This is the most common sense video I've seen on making a low cost, effective step. Thanks for doing the leg-work to find the items that make it simple.

[dannylang]

I bought this same setup for my boat trailer, then to make it more safe I put a piece of bent conduit as a hand hold while using, it’s a lot harder getting out than getting in. I drilled two bolts to hold conduit in the bottom of step and let it come out then a 180 degree bend and let it come up about 30 inches.😊 hope this helps someone.😊

[JohnMoore-qz]

THANKS SO MUCH FOR THIS VIDEO!!!
I just bought the both parts for $50 total on Amazon and easily installed them on my trailer without having to drill any holes.

[breikowski]

Ooohhhh! New truck! Pretty! Couldn’t tell, but always recommend stainless hardware.

[davidgarner]

Thanks for making this video. I bought the exact pieces and built and mounted it today. It’s makes getting in and out WAY easier!

[edgarbryant]

Great idea. I just followed your example and added one like it to my boat trailer. Works great. Enjoy your videos very much.

[terrymorris]

Great idea and video! You’ve earned a sub my man! Last year I took a fall stepping from the tongue to the bow at the boat ramp. I’m 6”4’ and I weigh 240lbs, gravity hates my guts to say the least. I’m like you, I didn’t want to spend all that money on something so simple. I’ve been looking for ideas, and your idea is pure genius. Thanks!

[garysosebee]

Great ! Just did this to my boat trailer. The only thing I did different was to add a one inch thick spacer under the bolts that go across the top of your trailer and drop the bottom bolts to the last hole. Piece ended up being 1x3x4 . this gives you an extra inch of lift. At my age every inch helps. I used a thick piece of plastic I had but you could use a piece of hardwood or a couple pieces of 1 inch square metal tubing, Thanks for the video.

[rickyp.]

Great idea!! You said top of the tongue to the top of the step is about 10". What is it from top of the trailer to the top of the bow? Trying to see if this will work on my glass boat.

[MichaelJones-bptl]

Your idea is awesome. Any ideas for a two stepper.

[jamiebell]

That's a great idea! I have a boat on the way and was ready to plunk down the $400 for a step system.. I'm gonna try to make this work instead👍
Just a suggestion.. maybe add a non-slip pad on the top of your trailer...another excuse to add more cool foot bling! 😎

[gregbryant]

This looks great. Thinking of adding a step on my boat trailer. 2002 Javelin 18ft. How far up from the top of the trailer tongue is the step? And how far from the side of the tongue is the step? Thanks.

[docriordan]

My wrench support bar is straight up so I bolted directly to it. Your balance is much better than mine and I'm still trying to figure out a grab bar that will work after that the fishing life will get better.

[filred]

Great idea! I think I'll do the same, but I'm worried about the spare tire carrier strenght. It's made to carry a wheel with the rim, probably 40/45 lbs. Being me almst 200 lbs couldn't it bend or break?

[jonashamrah]

Can you pleae tell me how you mounted your spare tire to your trailer? I really like that. Thanks. Great video's to, sir!

[breikowski]

Just bought both. It’s a no brainer. Hope you got a couple pennys!

[Steve]

Thanks for sharing this idea. I have placed an order for the materials. Looking forward to getting it installed.

[pauleyplay]

What a great idea Many Thanks I needed this so bad

[fsabjf]

Works like a charm and I’m 270lbs

Thank you

[jimlmackjr]

Hey your video showed up on my feed. After watching this i noticed that up could almost mount it on the 4 bolts next to your winch at the lowest setting and would eliminate the tire mount