SurfaceMaxx Pro 4500 PSI Surface Cleaner Performance Test with 3200 PSI Pressure Washer

Link to SurfaceMaxx Pro Pro PW Surface Cleaner 4500-PSI:

I use this surface cleaner with my 3200 PSI 2.4 GPM pressure washer.

Product Info:
Dual rotating nozzles with 15-in path clean large surfaces quickly and efficiently
Professional-grade construction and corrosion-resistant stainless steel housing
Pro-quality spray tips can be replaced when worn
Dual rotating nozzles with 15-in path clean large surfaces quickly and efficiently
Professional-grade construction and corrosion-resistant stainless steel housing
Pro-quality spray tips can be replaced when worn
Non-marking swivel wheels for easy maneuverability
1/4-in quick connect fitting attached to standard spray guns and wands
Works best with gas pressure washers from 2100 – 4500 PSI
Maximum 4500 PSI

[jmljml]

FYI, I just checked with SurfaceMaxx...this surface cleaner is equipped from the factory with 25 degree, 1.5 gpm nozzles (25015). In my case, my pressure washer is a 2700 psi, 3 gpm machine, so I replaced the nozzles with 25 degree, 2 gpm nozzles (25020) and it works very well.

[WD-yxfd]

I run this as a small area cleaner when I dont use my 24inch. It is a great cleaner you just need more pressure or the different degree nozzles. Typically on my 4400 psi machine I run it at about 3600 psi with my SH mix and it is a professional clean.

[OleStanman]

The description is what the maximum pressure of the unit is rated. I
used this with my Generac 2800 PSI and it did a rather poor job, though
it was a little easier to manuver than the EZclean 15" with no wheels.
I'm taking it back to Lowes.

[Chippy_The_Chipmunk]

can you do a paver driveway with this?

[antoniobonner]

Does this machine suction the water as it being released?