Temperature and Humidity Monitor using Arduino IOT Cloud and ESP8266

Temperature and Humidity Monitor using Arduino IOT Cloud and ESP 8266

Required Components
==================

1. ESP8266
2. Temperature and Humidity Sensor
3. Connecting Cable
4. Connecting Wires


Components Link
===============

3. Connecting Wires

Software Required
===============
2. Programming Language - C Language

Source Code
===========

Reference Video of Arduino Experiments
======================================

1. How to Display Current Date and Time in LCD

2. Top 10 Arduino GSM module projects

3. How to interface MPU6050 Accelerometer and Gyroscope Sensor with Arduino Nano

4. How to store Temperature data in Google Spreadsheet

5. How to Display Temperature, Pressure, Altitude Display in LCD

6. Rain Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects

7. Live Streaming using ESP32 CAM and Blynk App

8. How to store temperature data in SD card | Arduino Projects

9. Object Detection Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects

10. Distance Measurement in OLED Display

11. ESP32 Cam Setup | Face Detection | WiFi Camera

12. Temperature Display in OLED | Arduino Projects

13. How to get the Temperature Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects

14. How to get the Theft Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects

15. How to get Gas Leakage Alert Call and SMS | Arduino Projects

16. How to get Fire Alert Call and SMS in Mobile

17. Control LED by Phone Call

18. How To Receive SMS in GSM Module and Send Automatic Response

19. How to send SMS from GSM Module to Mobile

20. GSM SIM 800 C Caller ID | Arduino Projects

[jpvoodoo]

This sounds like what I want to do, but it depends upon this Arduino cloud. I would like to measure 5 rooms in a house along with one outside unit using wifi, but not with an internet connection. I want to graph them over time on one chart.

[ammisadukkala]

Hi I was at Anoka today, great work very informative big like and added keep in touch thanks ❤

[jackweslycamacho]

that click at the beginning literally reset my brain

[DogmannUK]

Would I be able to set one of these up in my van to check the temperature inside and let me know if it goes about a certain temperature? Would I be able to text the monitor and receive the info too?

[ikhlasneggar]

I have a problem with a BOARD "ESP32 WROOM 32" shows disconnected even though it is connected to the computer. and I want the code of dht22

[akhilakhil-lcwg]

Sir wonderful video...but there is no change in the temperature and humidity meters and graphs...though we get values through serial monitor....
Assume that you can reply...sir..please give a kind reply..

[joescopo]

Is there a way to trigger an alert if the esp8266 loses power or is unplugged?

[AAlejandra_Saav]

If the router tells me that it is connected but the IP address does not appear on the serial monitor, but the MAC of the device appears linked, I am connecting the ESP 32 with a WLAN 1100 (PHOENIX CONTAC) in the web administrator (of the wlan) It tells me that the ESP 32 is in the connected devices and it gives the MAC, but in the serial monitor it only shows points, that is, it stays in the while and does not show me the IP address, what could I do?
To connect the WLAN with a tablet or a mobile phone, I must configure the IP to be static, enter the data and it connects, how can I do it on the ESP 32? That is to say, it would be to put the data on its own IP address, WLAN IP, "prefix length" dns 1, dns 2, how can I assign (program) these values to esp 32? What strategy do you recommend?

[ankitagarwal]

I want to setup automatic temperature and humidity monitoring for my vermicompost production, need some help.

[PunamWankar-pn]

I am getting the error message "Serial Monitor Unavailable". Did all the steps as mentioned... But the Dashboard displays two dash ( -- ) in the Temperature and Humidity Graphs

[ianwogswart]

I've got this running on a sensor for a greenhouse, but the battery keeps draining and never recharges with the esp8266 plugged in(charges when esp is unplugged) could anyone help make a timer loop so it only reports every 10 minutes, and enters ultra low power mode at say 11pm until 9am, any help would be greatly appreciated

[macvideoworld]

Can I use a separate temperature sensor and a separate humidity sensor instead of the two-in-one sensor?

[VishalSharma-mpge]

Hi sir, how can we connect 6 sensors on single iot app to monitor temperature & humidity at 6 different locations ?

[vikramsd_it]

can this app send notifications/alerts when temperature or humidity exceeds a particular value?

[karzokalori]

I'm just getting nan values. Using a Wemos D1 Mini and DHT11

[nanisingidi]

Sir thanks for this video... But .... Is it give messages (sms) to mobile? Sir we got output as temperature and humidity values.. But can i know, is it gives sms to mobile?
Waiting for your reply sir

[beautyToadsworld]

Hi Great Video, but i have some problem with the data output.
I have a ESP8266 D1 and was able (after fixing a lot of other problems) to verify and upload the code.
I think the device is online, because on the router overview i see some esp with an IP adress. I cannot ping it, but i think this is not a problem and just not enabled. The hardware is fine, because i tested it with some normal arduino IDE sketch.

The Problem now is, that i dont see some data on the dashboard. Also when im in the Cloud on, ,Things'' and click on my device, the status is Offline. Maybe this is a Problem.

The sensor is a DHT11 with the light is on and the signal Pin connected to Pin 2, but i also tried with pin 4. (also with change the number in the code). I think this is also fine.

Some ideas, why i cannot see he value in the dashboard?

thanks in advance

[heshamfathy-qpfo]

What protocol is used in this project?

[samaviafayyaz]

hii .. i have been following this video step by step but my code has been uploding but it showing me hard reseting via RTS pins and then not showing any results on the graph . can you guide me please

[lakshmibelgavi]

There is error uploading while slecting the board and port ? How can we resolve this????