How a patch controller (or pedal looper works)

Just a quick video to explain how a looper works as part of a pedal board! Here I am using a Hotline Patch Kommander

[FatalBrainError]

Nice video, well explained! I would recommend using the Freeze before your modulation, delay and reverb so the frozen tone gets modulated ... sounds much more alive.

[Canario_]

Well explained, plain an simple. Thanks!

[johnnycage]

Just started looking at these, thanks for the info, really well explained.

[kiercronin]

I just got silly question I but the pedal doesn't switch the pedals on and off.... it just cuts the signal? I shouldnt expect the pedal lights to go on and off?

[stephanguisseppi]

Is there any drop out when switching presets?

[maripido]

thank you for the video! 3 questions - 1) what patch cables are you using? 2) the 4 little LED buttons are awfully close to the 3rd and 4th footswitches. Do you accidentally press the LED buttons when stomping on the 3rd or 4th ? 3) how is it holding up so far? Thanks again.

[mironoskroba]

Hello! Thank you for sharing such great piece! I am about to own this Patch Kommnader as I found out it best meets my personal criterias. However, there is one last thing I really need to know before I make the final statement. Could you please help me with my case?

What I need to achieve by installing this thing is that I need to have, let's say for the sake of simplicity, 2 separate presets. The first one is the "clean amp channel" + flanger. The second is "overdrive amp channel" + reverb. My amplifier has 2 channels, A and B (clean and overdrive).

My question is, am I able to create those presets using Patch Kommander? My main goal is to make it simple, so I could switch between them using only "1 click". I am confused because of built-in footswitch between A/B channels.

I hope to hear back from you soon!!

[Dave-beld]

What patch cables did you use? I’ve just received my switcher and the loop inputs are so close together my cables won’t sit in together.

[LMGeomatica]

Thanks for the video. Helpful. Do you know if is the switch A/B momentary or latching? Does it work for marshall DSL series? Regards

[MuriMorello]

how do you chanced from stacking them to one-to-the-other with one click?

[SacredKOfficial]

Silly question mate probably but how do you assign the pedals to the patch?

[AntonioRamos_To]

What is the SW A/B input for? Is it input or output?
Thanks

[tonybroken]

i like the simplicity of single pedals and I don't use a lot of pedals but my main issue is say turning on wah and boost at the same time for a solo, or phaser and boost. Is there something simpler i could use than this?

[realmusicyou]

Thank you very helpful, did yours come with a power supply? mine did not. can you recommend one that is compatible?

[mixingmasteringservice]

Distortion going to Input amp and other modulation and delays for fx loop in amp ?

[Jack-siig]

What Pedal Board is this out of interest?

[Jack-siig]

Is there a mode or bank to just have your pure amp tone at the switch of a button?