Power Options for Pepwave External Access Points

In this video, we outline various ways to power external access points in a mobile connectivity setup. Mobile installations add complexity when powering mobile devices whether powering with 12v DC power or with Power over Ethernet (Poe). In this video, we outline the various options available.

Product Links:

Wireless Access Points:

Educational Links:

Wifi Access Point Educational Series (4 Videos)
There are 4 videos in this series for setting up External Access Points. For the best results, make sure you have watched the videos in order as each builds on the previous.

[stuartrogel]

I have a Pepwave MaxTransit Pro that has worked really well for me with the paddle antennas that come with the router, all located in our 24 foot coach. However, we want to improve our cellular signal even more so today we bought the Pepwave Mobility 42G. Will I still need an access point when install the roof antenna? I use cellular data 99% of the time. That’s why we bought the dual modem router so that we could have plenty of cellular redundancy. I never rely on campground WiFi. Can I just disable WiFi AS WAN and allow the WIFI radios in the router to be dedicated to the local WIFI? I don’t want to install an access point unless you think my WiFi will be substantiallydegraded by moving the antenna to the roof unit. We will be streaming Smart TV, Zoom, Sonos and using iPads, laptops and phones. About 10-15 devices.

[agelessrving]

How do I do POE with the 4-pin connector on my Peplink MAX BR1 Pro?

[broadwayscott]

If I use POE to connect my Transit Duo to my Pepwave AP mini how close can the two devices be. My Transit Duo antennas are connected to a Poynting Mimo 3-17 antenna mounted directly above my Transit Duo.

[sonofagunM]

How many Amps does it use and idle at at 12 volts?

[RVingwithG]

3:09 If the "Brick" is 120ACV step down to 12DCV then just CUT THE PLUG OFF and fuse it into your 12DCV power.