How to program FAAC remote?

preview_player
Показать описание
To program FAAC remote is easy if you have old remote which is still work. you don't need to access control box.

You just stand near your gate about one meter away. Not too close not too far.

Assuming button 1 operating your gate. Almost people use button 1 for the gate.

Press down button 1 and button 2 on the OLD remote together hold two seconds.
Press button 1 on OLD remote one second then press button 1 on NEW remote one second.
After wait 5 seconds you can test new remote if works.

Repeat above procedure for programming another remote program if you want.
Рекомендации по теме
Комментарии
Автор

great.. info hidden everywhere.. saved money and time. the door sellers keep this info for themselves

jcbl
Автор

I always be back here to watch when I need Haha! Thank you again, sir!

jhoselitoaristoteles
Автор

Really I appreciate your help, finally I can program a control without access to the main controller

ZANKOKU
Автор

Great video, and it worked, was putting this job off for months as thought needed to open the unit 💪🏾

jasonmck
Автор

Thank you! Worked like a charm on a FAAC 740.

wengke
Автор

what a legend it worked! Can this work the same for other remotes or is it just FACC remotes?

SuperWill
Автор

Me quedé con la duda si ahora funcionaba solo el nuevo, o funcionan los dos controles

halireri
Автор

I just ordered the newer black remote as in this video, is it possible to do this with an old white remote as the master?

patrickboyd
Автор

Thank you worked well!
How do I program multiple controls?
I would love 3 remotes to work!

gulaysarac
Автор

Procedura:
1) con telecomando originale tieni premuto per 5 secondi (non di più altrimenti dopo 10 secondi cancelli la programmazione) tasto 2 e 3 contemporaneamente. Mantieniti a più di 30 cm dalla centralina.
2) Sempre con il telecomando originale clicca il tasto di apertura del cancello.
3) Prendi il telecomando nuovo da programmare e clicca il corrispondente tasto.
4) attendi 10 secondi per dare la possibilità alla centralina di uscire dalla modalità programmazione.
Fatto!
Ps
Le istruzioni sono pessime!

juvana