Easiest Way to Sand Hot Mud! Diy Drywall Repair Tips and Tricks

Показать описание

I think the easiest way to sand hot mud is to wet sand! In this diy drywall repair tips and tricks video I'll be wet sanding drywall patch after doing two coats of 20 minute mud.In my last couple of videos I showed you how repair in the ceiling cracks so they never come back! Thanks so much for watching and subscribing! -Paul

If you're not subscribed? Consider subscribing to see more of my upcoming video's.

~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's the videos I mentioned in this video:
Wednesday Walk-Through- Don't Make This DIY Drywall Mistake!

Torn Brown Paper on Drywall? Diy Drywall Repair Tips and Tricks

How to Repair a Ceiling Crack- Diy Drywall Repair Tips and Tricks

The 20 Minute Mud Challenge!

Feel free to ask any questions about hot muds and ceiling repairs or if you have a video requests in the comments below?

Here's all of the videos from my Pro Painter Secrets Revealed Video Series:

Part 3- How to Never Have to Clean Your Paint Roller Again

Part 5- How to Roll Out a Wall Fast and Easy Like a Pro!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's the Part 1 of the Water Damage Repair Video Series where I show you how to access and dig into the water damage drywall ceiling and a water blistered wall

Here's the Part 2 Video: How to cut out and install drywall on a water damaged drywall ceiling

Part 6 How to easily fix damaged drywall by skim coating
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 1 of the skim coating video series:
Skim coating walls for beginners tutorial
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Easiest way to repair knockdown texture on a wall patch ever!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to apply a skim coat series:
Part 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 2- How to Skim Coat Walls Demonstration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 3
What to do after skim coat dries? No sanding!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 5
How to sand a skim coat fast and easy!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's a couple of the Skim Coating Demonstration Videos:

#PaulPeck #DrywallTube

Рекомендации по теме

Комментарии

Yup! The wet rag definitely works. I find with a wet rag and a grout sponge I can entirely avoid sanding small patches and be ready for primer

lestalkmorebasss

Good advice there. I wet sand hot mud sometimes by using those special sponges they make for drywall or one of the sponges with the green scrubber on the back as they get pretty aggressive with the edges. Sometimes I just put my big fan on it and get the edges to dry enough to dry sand it. Have you ever tried standing your 6 inch knife up at a 90° angle to the ceiling to scrape off the left marks? That’s my other trick for hot mud. I bet I have spread 5000 bags of hot mud in my life, LOL 😂 #drywalltube

ThatKiltedGuyDIY

Hey Paul! Thanks for the video on wet sanding hot mud. It worked great, I used a damp sponge that was wrung out pretty good to wet the hardened hot mud and then wet sanded, just as in this video. The sponge softened the almost setup hot mud and the the sanding sponge blended perfectly. Thanks for this advice. Keep up the tutorials.

waynehuffer

Please do a video about the self-spreading mud that is thrown on walls and ceiling so we can see it find the crack and make a perfect patch without labor.

IGotsToKnow

Curious if you can leave the 5min- 90
Min hot mud and leave smooth prime and paint? Or do you have to do a all purpose?

RickFlairWoo

How you wet sand hot mud without caking up on whatever your sanding with?? If i even touch it with sandpaper or sponge when the stuff isnt completely dry it will immediately cake up on the paper.. which causes me to run a big whoops all across the repair..

Z-Ack