Ironman 4x4 Foam Cell Pro Suspension 5000 Miles Review

After running the Ironman 4x4 foam cell pro suspension kit (stock UCA) for around 5000 miles, we decided to make a short review of what it the experience was like. Overall, we are very satisfied with the value they provide. If you have any questions, please feel free to ask in the comment section.

[lemsfasho]

one way to stop the noise is When installing the suspension it's always good to tighten the bolts to spec after you have the weight of the truck on the ground so your rubber bushings won't twist and bind.

[BoomersEve]

As far as other people flashing their lights at you, did you align your lights after the lift? Most people forget this step, its usually just the turn of a screwdriver to adjust the lights lower.

[NWSE]

Have you noticed increased where on the tires, CV axel or anything else?

[nanopotato]

Interesting build any new updates or pros and cons?

[paulthompson]

Between these and bilstein 6112 I can’t choose! Help!!

[BadgerLife]

I have squeaking from my front passenger side. I ended up putting white lithium on top of my strut where it touches the coil bucket. The rubber is very squeaky. Test yours with wd40 and see if youe squeak goes away

[bradgraham]

How has it been for you guys after having it a while? I just ordered this kit and skid plates. Any input would be great

[vincentianlaureta]

what spring you use? i think they have the A B C for different purpose

[kawikacressman]

What trail are you on there? Are you in BC Canada or Washington state? I have been debating which BFG KO2 tire size to get ... and now I've decided on the size you have~ I have been back and forth between a 255x75/17 and 285x75/17 ... 32" vs 33.9" ... so yours at 32.8" was a good compromise and I agree with the look the 16" gives~

[rappinron]

Would you know where I can buy some anti-squeaky?

[irfanspace]

great review, big mistake by diy, never super tight bolts while on jack, hand tight, and when on tires use torque wrench and tight them, put anti-seize on all bushes, i did mine on 4runner took me 12 hours, and no issues, one big complain after placing ironman foam cell, my rigid is rough ..😒

[MaYbYleR]

I put overload rear springs on my truck and it got way smoother. But i actually have a heavier load instead of nothing. Steel bimper and camper shell. Never put heavier springs on unless you are heavier.

[toyhighlux]

Nice job, I will bet your squeaking it’s from not putting the vehicle/suspension on the ground before tighten it all the way up, it needs to have load on it. Loose everything while on the ground and retighten.

[tribunation]

Icons are overpriced and problematic. Common leaks.

[youtoldharpotobeatme]

I installed the JBA UCA's and install was a breeze. The bolt was an easy removal. Maybe I got lucky. 😆