DIY 5 Guitar Stand / Rack Made For Under $20

How to make a DIY 5 Guitar Stand / Rack For Under $20

Parts List:
20 feet of 3/4 inch size PVC pipe
PVC cement
16 pieces x 3-way “ T ” connectors (3/4 inch size)
6 pieces x 2-way “ Elbow ” connectors (3/4 inch size)
6 pieces x pipe end cap (3/4 inch size)
12 feet of pipe insulation (3/4 inch size)

Measurements:
6 pieces x 2 inches long
2 pieces x 3 inches long
5 pieces x 4 inches long
8 pieces x 6 inches long
4 pieces x 12 inches long
4 pieces x 15.5 inches long
1 piece x 32.25 inches long

A Great Website for Reference:

#jandwmusic #jandwmusiccompany #guitar #guitars #acousticguitar #electricguitar #guitarshop #guitarstore #guitaramplifier #fender #shreveportmusic #bossiercitymusic #shreveportguitar #bossiercityguitar

Follow us on:
Snapchat - jandwmusic

[Iknowonlywhatimtaught]

Thank you. I been forever holding off buying a stand for mine. To cheap to put out the money for a stand that may damage my guitars. This is the perfect solution and won't scratch them up. $3, 000 a piece is still a lot of money to pay for niece equipment and get them damaged. Cheers.

[vicksmith]

My man your a genius I Have Been seaching everywhere for a great diy rack and unless I have a full blown wood working shop it ain't going to happen perfect Thankx !!!

[crowolfe]

This is great. I followed the link and the instructions are thorough and easy to follow. I paid about $30 for my parts minus the glue - already had some. And I bought 2 extra 5” pvc pieces and a few extra connectors. Cheers.

[benevolentwaffle]

Making mine now for a school project! Thank you! I didn’t get PVC cement so only cost me $24 👍🏾

[OscarOrtiz-uype]

Gracias, genial.. Lo hice para 7 guitarras. Espectacular.

[Snailmailtrucker]

Thanks JandW...The World needs more people like you !
LIKED/SUBSCRIBED !

[FEBRIZIOtv]

Follow his advice: put it all together and mark the tubes and elbows with snug alignment markings. I skipped that advice and my base is wobbly when no weight is on it.

[AnxiouPanda]

Nice build Sir! I'd like to add a lock on mine but I don't know how to do it, mind if you show us how? Hehe.

[terryscheid]

Wouldn't the smaller pieces in order to fit inside the 3/4 pipe have to be smaller in diameter like1/2 inch
Otherwise the pipes would be the same and not connecting with the others at all

[deanaf]

I like it. e Tees are 30 bucks for 16.

[sergioajaimes]

can anyone give me the final assembled dimensions of the whole rack? I need to know the width, particularly...

[willwilburn]

Where did you find used materials ? You did not get that much PVC for $20 at any hardware store. The individual fittings cost more than that.

[oskarvasquez]

Las medidas que has dado no sirven haz bien la cuenta

[gymover]

how many times did you say "UH" in this one?

[arijitkundu]

Please give me the measurement of pipe

[KillVanKull]

NOT under $20 dollars - more like $40 dollars. After time spent, not sure it's even worth building over buying a less-expensive one on eBay.

[loganstirlitzdionio]

can someone give me the parts needed for 2 guitar? im just bad at the measurements. 🥲