Introduction to LIQUI MOLY Ceratec (Art. 20002)

Learn how LIQUI MOLY additives can save you from high repair bills and protect your vehicle.

Cera Tec is a high-tech ceramic wear protection and can be mixed with all commercially available oils. Cera Tec reduces friction and wear by using chemically and thermally extremely high-resilient ceramic compounds. Prevents direct metal/metal contact, increasing the service life of the aggregate. The smooth-running effect reduces fuel consumption in gasoline and diesel engines.

[ChandraSQLVideos]

Say my car needs 5.2 litres of engine oil, do i need to reduce the engine oil quantity by 300ml to use Ceratec (or) should use 5.2 litres of engine oil even using Ceratec ( which is 300 ml quantity ) without any issue of overfill..

[lmalesci]

greetings from Italy Florence I on my Suzuki Jimny 4x4 petrol 1.3 with m13a engine year 2001 I did the engine oil change in 2021 with Liqui Moly leichtlauf performance 10w40 a good product and in 2022 I did the oil change of 12, 000 km it took the ceratec additive and as engine oil I put the liqui moly leichtlauf mos2 10w40 also a good lubricant and then I use the Liqui moly additives to clean the petrol injection system and the valves!

[TheHarissha]

Hello Liquimoly, i have fiat 1.3 multijet diesel engine with 225000 km, can i use cera tech..? What quantity..?any risk of engine failure..?

[bobbyvh]

Can I add ceratec between oil changes ? I use synthetic oil

[DanBrett-vh]

I have a 4.2l v8 engine that uses 9.6l of oil. Do i need to use two cans of ceratec? Thanks

[metatronmen]

Is very little or none information about Ceratec and GDI turbocharged
engines, perhaps more you add to the oil more stuff can buildup in the
intake valves?.

[hokz]

Will an engine flush in the next oil change after running ceratec be okay?

[takealooknow]

Hii, I have changed motor oil with "liqui moly 4600 5w-30 dexos2" nearly 800-900km ago / 3 weeks ago. My car is at 49000km and it has diesel 1.6 motor. I want to use ceratec but i am not sure to do it because my new oil is not completely fresh. Is it usefull for me to use ceratec or should i wait until next oil change time for fresh 5w-30 4600 LiquiMoly oil?

[years]

ceratec is inserted into the engine with the engine running ??

[IcarusIcarus]

Dear sirs i own a 2004 toyota corolla 1400cc with 250.000km which also runs with LPG fuel, i have an oil consumption of approximately 1litre every 5000km, i change oil/filter(5W40ENEOS) every 7500km. I m thinking of using Ceratec, with this also help with the oil consumption or i also need some other liquimolly product and if yes which way can i use them ?
Kind regards

[mahmeyndan]

Good day my car is montero sports 7 liters of engine oil, is 5w 40 liqui moly can be good combination to this ceratec

[kw]

Hi, I'm really concern is it safe to mix LIQUI MOLY Ceratec with SN Plus or ILSAC GF-6A oil spec LSPI (Low Speed Pre-Ignition) protection engine oil.
Would Ceratec be reduced those GF-6A oil spec regarding of (LSPI) protection ?

Because I can't find any related info about Ceratec and (LSPI) on the LIQUI MOLY websit.

[mohamedzameer]

Does it matter if the car has dry or wet clutch?

[shantanuchandra]

I used Ceratec with Molygen 5W40 in my car. What should I do now? Can I drive up till the next oil change since I spent quite big bucks on the two.

[IcyDragon]

What happens if I use an engine flush next oil change? Will the Ceratec de bond and I will have to add another can?

[prasannakumarbrmbr]

I have a Petrol CVT car, is Ceratec safe to use with Liqui Moly 5w30 fully synthetic engine oil?

[Condor]

I use Ceratec in my old 5.7L Subruban. It runs nice and smooth, but does Ceratec fall to the bottom of the oil pan if I only drive it once every couple of weeks, or even every few weeks?

[jas]

is cerat tech good to use along with mos2 anti frcition oil treament at the same time? or is ceratech an upgrade to the anti friction product

[xmgxmgomez]

Can this be added with motor oil saver?

[murbo]

I`m using Liquimoly 10W-40 MOS2 engine oil so I guess it`s not a good idea to add ceratec to this type of engine oil which already comes with MOS2 pre-added. If you could please clarify this. My car is a well kept old German 80`s turbo Ford Escort RS. Runs smooth and is a daily driver still.