Retrofit Low Profile Underfloor Heating - DIY Kit for Installation on Clip Rails | FLEXIRO

How it works - Learn in less than 3min how to retrofit a thin underfloor heating in selected rooms on top of existing floors. The FLEXIRO underfloor heating connects even to conventional heating systems with RTL boxes. Make the indoor climate at home your project. Comprehensive installation manual, specifications and prices at:

[andyturner]

A system that comes off the radiator Circuit will never work properly, under floor heating needs it own flow and return and control of the heat source ie the boiler. The rads will heat the house up quicker then the underfloor and will turn off before the underfloor can ever get up to temperature

[gocharusia]

Thanks, bro. Стало на душе светло. Very very positive fillings.

[GeorgeEid-fngw]

What software do you use to create all this animation

[kyazdani]

I'm wanting to install this in my new utility room extension which is 3m x 2m in size. The radiator this system would connect to only has 10mm pipes. Is this a problem?

[anthonyroberts-gl]

If temp from a boiler is 75c to heat a radiator, how can this system withstand that temperature when it can only work at 30c tapped into the radiator pipe line?

[SBTRIS]

I see many underfloor heating systems come with their own seperate circulation pump, are normal central heating pumps sufficient, will it cause early wear and tear fatigue of the pump? Think I would need 4-5 of these to do my lounge + kitchen.

[mohammadahmad]

Will this not have dirty central heating water circulating in it? And how do you control the temp?

[mgastra]

Great video, this system looks great for what i'm planning. What type of leveling compound should be used? At 2:06 in the video it says it needs to be flexible but I cant find one. What would you recommend?

[tomcrockett]

Can this be run off 10mm microbore pipe? And what a the maximum size room? My room will be 6m x 7m

[kevinloughran]

Can you please send me a link where I can purchase this thank you