MME6134┃ADVANCED MANUFACTURING┃SURFACE ENGINEERING┃SURFACE COATINGS┃W2/L6A

@JWL LAB
SUBJECT: ADVANCED MANUFACTURING
MME6134
INTRODUCTION
----------------------------------
LECTURE / VIDEO SERIES
FACULTY OF MECHANICAL AND AUTOMOTIVE ENGINEERING TECHNOLOGY
UNIVERSITY MALAYSIA PAHANG, PEKAN
MALAYSIA

------------------------------------
For further information please visit and contact

Joining, Welding & Laser Processing Lab (JWL)

1. Vacuum brazing of titanium alloy to stainless steel enhance by fiber laser surface texturing

2. Pulsed Nd: YAG Laser Parameters Effect on Welding Uncoated Advance High Strength Steel (AHSS) for Automotive

3. A comprehensive assessment of laser welding of biomedical devices and implant materials: recent research, development and applications

4. An Analysis of Geometrical and Failure Characteristics of Laser Micro-Welded SS304 and DSS2205

5. Comparative study between furnace brazing and laser brazing

6. Microstructure analysis and mechanical properties of dissimilar AA6061-AA7075 laser brazing with prefixed ER5356 filler

7. Current research and development status of dissimilar materials laser welding of titanium and its alloys

8. Effect of Laser Surface Modification (LSM) on laser energy absorption for laser brazing

9. Enhancement of mechanical properties of Copper Brazed by laser surface modification

10. Weld Geometry Investigation on Dissimilar Boron Steel Laser Welded for TWB Application

11. Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology

12. Microstructure, mechanical, and failure characteristics of laser-microwelded AZ31B Mg alloy optimized by response surface methodology

13. Characterization of heat-treated gas metal arc-welded boron steel sheets

Some of the articles related to surface engineering are

1. Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings

2. Scratch adhesion characteristics of PVD Cr/CrAlN multilayer coating deposited on aerospace AL7075-T6 alloy

3. Effect of surface texture on the tribological performance of DLC coating

4. Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition

5. Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review

5. A Review to the Laser Cladding of Self-Lubricating Composite Coatings

6. Effect of change in temperature on the tribological performance of micro surface textured DLC coating

7. Effect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review

8. Laser-based Surface Modifications of Aluminum and its Alloys

9. Investigation of the mechanical properties of electrodeposited nickel and magnetron sputtered chromium nitride coatings deposited on mild steel substrate

10. Structural and mechanical properties of (Cr, Ni) N single and gradient layer coatings deposited on mild steel by magnetron sputtering

11. Investigation of laser texture density and diameter on the tribological behavior of hydrogenated DLC coating with line contact configuration

12. Scratch adhesion and wear failure characteristics of PVD multilayer CrTi/CrTiN thin film ceramic coating deposited on AA7075-T6 aerospace alloy