Metal joints without welding #metalwork #joint #welding

#metalwork #joint #welding

[rab..]

Might be strong enough to use as a picture frame...

[ravisingh]

Iron will cut aluminium rivet like butter under load

[D_Will_O.G]

And thus. The 2020+ ford chassis' were born

[Movieman]

As long as that's not being used for any high stress applications, it's not a problem. But those rivets are aluminum. The shear load will slice the rivets easily. Better steel rivets or maybe steel pins would be stronger. You can even use grade 8 bolts instead.

[valekokoev]

Если ты плотник и ни разу не сварщик то это видео для тебя.😂😂😂

[DIYToPen]

Will bend at the uncut edge and the uncut edge can't lay flat. Just an exceptionally weak joint. Also bending the internally flanges and then hoping you can find them with the rivet, and again hoping that they get pulled in by the rivet.

[재선김-br]

참신한 좋은 영상소식 감사드립니다 👌
From South Korea 🇰🇷 💕

[colerogers]

This is a great idea if you cannot weld but anything you do this way cannot be used for structural purposes. The aluminum rivets will shear off and cause complete failure.

[-anything]

얇은 철반은 용접이 어렵고
또
현장에 용접기가 없거나
용접을 못하는 화재취약지역 일 경우는
이 방식의
연결 장식이 없을때는 유용한 정보 입니다

[ИрэнаКурт-хь]

Обалдеть!!!! Не надо думать о материале, надо просто делать !!)

[atnfn]

What you notice at once is despite those rivets. the only thing actually holding those two parts together is that thin strip of metal at the top. Which it also looks like will "easily" tear appart since it's already cut into like that.

[yayanklaad]

rapi cepat dan kuat, teri kasih ilmunya

[Grrrrrey]

250 полуляхов из 250-ти! С таким же успехом можно было скотчем примотать, всё равно нагрузок такое соединение не вынесет. Зато времени на него потратишь много, если твоя задача - убить время, то это отличный способ😂

[instrutoraldinho]

Aí ficou top demais, é pra aplaudir de pé.

[НиколайМаксимов-юж]

Классно🍓 получилась очень красива🍓🍓🍓🍓 смотреться красива🍓🍓🍓

[benjaminbasler]

Look maybe for small projects that don't hold lots of weight but a wield is always better because it's stronger. So if you plan on these holding lots of weight don't use rivets

[hacky]

It will split easily when opened. Closing the joint will probably hold op pretty good

[wantorocv.bravocargoexpres]

Ini baru vt yg baik ilmu yg bermanfaat 🙏👍

[sofia_sinta]

Sie ist vielleicht die bescheidenste und herzerwärmendste Person, die es gibt😊😊😊❤😅

[CapnCrispy-grjg]

You may want to weld it along with the rivets, it would be too weak and it would bend when put under pressure