How to Install a CWA-150 Coolant Pump on your Audi 3.0T | C7, B8, SQ5

preview_player
Показать описание
In this video I install a CWA-150 Coolant Pump sent to the channel by MercRacing. It installs exactly like a CWA-100-3 coolant pump, except for the fact that you have to replace a 15 amp fuse with a 25 amp fuse due to the power draw from the CWA-150. If you need a detailed DIY video showing how to actually install the pump into the car, check out our DIY video for installing a CWA-100 in the links below. You will also find links to data logs mentioned in this video.

LINKS:

DATA LOGS:
Рекомендации по теме
Комментарии
Автор

Hey man I appreciate your videos and the info you give to maintain these beautiful cars ! I own a 2014 C7 3.0t and your videos help a lot to know about them more.

triiipleram
Автор

Thanks Cameron again for a great video. Headed to the garage for some continuity checks to verify that fuse.

D_Vader
Автор

Don't even own a audi but your videos are great man keep up the great work

justinvalade
Автор

Cameron: "Put the ECU away from the moisture" and people at Audi decided to place it right underneath the Windshield Wiper fluid, very smart people.

Subzz
Автор

Hi Cam! I'm installing my CWA1500 next week! Im thinking of replacing tensioners as well while im at it bc my 1360 Bando belt snapped yesterday and I'm running a 207mm crank pulley. Matt mentioned that I may have had tensioners. Do you know what tensioners I should replace to avoid the new belt from snapping again?

lunchmoney
Автор

I ran a switch in the car to interrupt the pwm wire so I can control when it runs normal or at 100%

dmcbuilds
Автор

All this great info and my brain can't get past the fuse being upside down. LOL! Thanks for taking us on your journey. By the way do you know where the fuse for the cigarette lighter is located?

cm.
Автор

Cameron since you mentioned that need to undo the battery for the sake of the cpu, How ever do it need to reprogramed the system again? Thus will be will be the same procedure like changing the battery ?

jhigsrocan
Автор

Hi Cameron just watched the coolant Divorcing video awesome video so I just recently just swapped my heat exchanger to a upgrade one from ecs so in there instructions to bleed it is to turn the car on but not running to kick on the auxiliary water pump so I did and it dose not come on so I check the plug for power and it has power I also rigged up a 12 volt source to touched the pins on the pump and it comes on so I’m not sure if the pump is bad or dose the pump come on a different way I have a 2011 Audi s4 thanks

toddcoakley
Автор

Hi Cameron, just wondering if you know where the fuse is exactly for the S4 B8.5, any pictures would really help. Thanks!

paulibanez
Автор

Hey Cam, is it safe to use Cwa-150 without a divorced setup?

JoeyS
Автор

Would you recommend installing the CWA-100 or go for the CWA-150? I will go stage 1 soon, car is stock now. I don't have a HX yet.

luiszubillaga
Автор

I have a b8.5 s5, with a stage 1 ecu tune from IE. Is it worth buying the cwa 150? I do have the merc racing hx but haven't installed it yet. I'm also looking to go stage 2 but with a single pulley upgrade.

mastalee
Автор

Would you recommend this if we are tuning an s4

exoinky
Автор

How do you get the pin to release to pull it out the plug?

bads
Автор

i want to try this on my c6 3.0 but kind of scared something wont work out anyone tried this on the c6 a6 3.0 yet?

donovanmorris
Автор

What does PWM stand for in “pwm wire”?

icecubeninja
Автор

I’m curious to see if the 150 with an OEM Heat exchanger can net the same benefit of the 50 pump with and aftermarket exchanger.

It’s definitely cheaper and easier to upgrade the pump VS upgrading the HX

miket.
Автор

Please Help!!! I hit a opossum last night going about 65 MPH busted my front bumper and it ripped the 3 pin connector out of my coolant pump. I purchased a new 3 pin connector each pin is numbered 1 2 3 but the wires are solid black. I have 3 wires dangling from the harness that goes to the pump the colors are solid RED, solid VIOLET, and RED with a WHITE stripe. Does anyone know what color goes to each specific pin Any help would be greatly appreciated.

MrMitch
Автор

hello buddy, , there is a way to contact you ? i need advice from you please !

ralphabed
welcome to shbcf.ru