Canon 5D Mark IV Top cover Dial Assembly Replacement.Step by Step.

preview_player
Показать описание
This is a step by step tutorial on how to remove a defective Top cover Dial Assembly and install a new one in a Canon EOS 5D Mark IV.
Рекомендации по теме
Комментарии
Автор

worked great for me! there was one weird bit where you have to put the bottom on before the front. but all in all great tutorial and i'm so happy my camera doesn't suck to use any more!

jnthegreat
Автор

My old Mark IV isn’t worth sending in to Canon. This was actually pretty easy. I’m sure a few screws got swapped around and in the wrong place. But it works just fine. Thanks for the video. Would not attempt it without it!

nelsphoto
Автор

worked perfect! thanks for sharin sir!

fmm
Автор

After months of hesitation I took the plunge. Great tutorial, Thanks! To answer (my and) others questions, I used a #00 Phillips -- start with a NEW, good quality screwdriver! Some of the screws, notably on the bottom appear to have loctite or other thread-locker compound on them, and require care not to strip the heads. The rubber grips are indeed reusable, just clean the camera surfaces with alcohol before re-applying. There are 40 screws of different threads and lengths, so good organization is key!

gontrandurocher
Автор

Thank you very much for posting. Film helped me to do the repair myself.

henribijkerk
Автор

Thanks for your video man, I changed it successfully with your help 🙌🏼

rackkkham
Автор

Thank you!!! I followed your video and everything works great again. I was able to bypass removing the white wire and work the disassembly with it connected. My only problem is the black screws... I stripped 2 and had to resort to some primitive methods to get them removed. My recommendation is have a good tool set. Mine was a cheap $25 kit off Amazon.. All said, it works perfect!

TheBlur
Автор

Thank you! I fixed it and succeeded with your instructions.

luontovalokuva
Автор

Awesome video...wish I had the guts to try this out. So sad that the shutter wheel is so hard to replace. I got a quote from Canon to do it and it was $420. The part itself is like $20.

GrillSergeant
Автор

I am really nit picking here, but if I could always see the screws that you are taking out (always putting them in a visible place) it could make the job even easier. The length of them varies so it is very important which screw goes where. It also scared me a lot first that I did not see anything on the screen when assembled the camera. Later I figured it was because the connector of the screen needs a firm press so you can hear the clicking in noise. Super nice video though, it really helped me a lot, that replacement part is only about $39 from China... you saved me an expensive repair service, thank you!

moksavideo
Автор

Brilliant stuff Mate. Well laid out steps. In my case I need to replace the bottom pcb and am wondering how much of your steps I should follow.
Do you think it's easier once I separate the back cover from the main board? I wish I had the courage like yours. Just wondering if I could give it a go. The quotation I got from the service center is ridiculous £430.00
I got the new part and just need the courage.
Well done and thank you for your video. It really did cover much of the steps and will certainly follow it.

Really Appreciate🙏🙏🙏

beemarentertainmentltd
Автор

Thank you so much for the video I just ordered the part.

AJRobinson
Автор

John….how do the rubber surfaces get re-attached to the body? Do they stick on their own, do you need to apply adhesive ( if so, what type), or do you need to purchase replacement surfaces. Very impressive piece of work. I am going to give it a shot but warily. Thanks

edquinlan
Автор

What tools are needed? Looking for specific size screwdriver. Thank you.

stevendewberry
Автор

Can you reuse the rubber grip or do you need to replace them? Where can you purchase new ones if you cannot reuse them?

dennishensley
Автор

I have the problem that when I turn that top wheel to change my shutter speed it's erratic. So, I went into the function where you can assign the wheel on the back to change the shutter speed and it's still erratic. Could something else be wrong with my camera? 5d mark iv as well. Thanks for any input.

bobczz
Автор

I just bought a second hand mark iii with the same problem, and saw another video where the guy sprayed in some contact cleaner into the dial without any disassembly… yes, it sounds reckless, but what are your thoughts? It will dry, but will it actually work and will it cause any long term corrosion on those thin data cables?

finite
Автор

Great video. Where did you buy the replacement assembly?

clemensvanderwerf
Автор

Please tell me, what screwdriver do you use to disassemble this camera? Thank you.

chich
Автор

I changed my mode dial button (assembly) of my canon 5d mark iii and re-Assembled my camera but now it won't turn on. It sometimes blink a red light but thats it.. ir womt turn on.. any solution please? 😭

waizfazal
visit shbcf.ru