filmov
tv
In the given circuit, the equivalent resistance between the terminal A and B is
Показать описание
#neetimportantquestions #jeeimportantquestions #jeepyq
Physics Kaksha
Рекомендации по теме
0:05:25
In the given circuit, the equivalent resistance between the terminal A and B is
0:02:19
For the given circuit, the input digital signals are applied at the terminals A, B and C. What woul
0:01:15
In the given circuit, the switch is closed to the position bc from the earlier position of ac at....
0:04:31
In the given circuit the current `I_(1)` is
0:04:56
For the given circuit, the input digital signals are applied at the...
0:05:29
In given circuit, the value of currents \( I_{1}, I_{2} \) and \( I_{3} \) are:-
0:04:38
In the given circuit diagram when the current reaches steady state in the circuit, the charge on ...
0:03:43
In the given circuit, the potential difference between \( A \) and ...
0:04:58
In the given circuit, the potential difference between points \( A \) and \( B \) is \( 18 \math...
0:01:37
In the given circuit, the equivalent resistance between the terminal A and B is_____Ω.
0:08:29
In the given circuit as shown in figure, in the steady state, obtain the expression for
0:03:56
In the given circuit, the charge on `4 mu F` capacitor will be : .
0:02:20
The current in the given circuit is.
0:02:58
An ac source is connected in the given circuit. The value of \(\phi\) will be:....
0:03:45
In the given circuit all resistances are of value R ohm each. The equivalent resistance between
0:14:06
How to Solve Any Series and Parallel Circuit Problem
0:04:48
The equivalent resistance of the given circuit between : Equivalent resistance
0:02:18
In the circuit shown 5 resistances are connected. The equivalent resistance between the two ...
0:03:43
, , In the given circuit, the potential difference across 3 μF capacitor will be :(1) 16 V (2) 1......
0:06:58
In the given circuit, assuming point A to be at zero potential, use...
0:01:46
Find the Output Signal for the Given Circuit
0:02:45
In the given circuit diagram, a wire is joining points B and D. The current in this wire is-
0:04:37
in the given circuit current through the galvanometer is
0:07:00
In the given circuit if point C is connected to the earth and a potential of +2000V is given to the