Your quick guide to DTF printing for shirts! #dtf

[tam]

May I ask what you have covering your top plate? I imagine it’s to swap out if anything gets on it instead of having to scrape the plate???

[motivetion]

You can see where the E didn't stick and lifted. She tried to hide it with her finger. You need to use a press pillow when doing hoodies. The pocket seam prevents the heat press from fully hitting the garment. That's why the E lifted. The press didn't go all of the way down due to the pocket seam. Press pillows people.

[jaybee]

How about sharing info on the printer, curing machine, heat press? That would be helpful. Thks!

[AbdullahSulaimanNabil]

May i ask how can i prevent dtf prints from cracking while washing in the washing machine

[Cons]

Noo question.. So one side is white.. So that's what you mentioned.. What about the other side which has color?
Sorry I'm totally new to this

[jayf]

Hi im using a sublimation printer, when i coat the print with the powder is it ment to be all clear or stil powdery if that makes sense? Im usinh a heat gun to heat it which works a treat

[ssoftrifs]

Can i ask what the transfer paper you used to print the design on? And is the hoodie or the shirt we can use should be cotton 100%?

[g-force]

Can you reuse the powder for other printing? Also do you mirror image like sublimation or not?

[sarahwinters]

What heat setting did you use and for how long? Should my shirt be around the bottom plate so it only presses one layer of material?

[thehigherupz]

Is dtf printing as good or better than screen printing?

[reneesavarese]

How did it go from white ink to color????

[anthonyjefferson]

It didn't print white on the other side.. what would the problem be ?

[MaximoToro]

Seems like a pain in the rear. Is it worth it?

[deanmadnut]

Hi there am I doing something wrong so when I print my design onto the transparent transfer paper I mirror my design onto the rough side as it says on the instruction but the other side is not white and you can see the design colours through the back? I'm having a hard time getting my design to stick onto t shirts I don't know if I'm using poor powder so I've ordered a five star review one as the one I've got has no reviews or any stars. Im using an epson et-2860 inkjet printer. Thankyou

[jessgarza]

So when someone orders dtf prints do we still need to cure the print or is that already done?

[ThatsCalifoya]

Hello, Do you recommend uninet DTF printers.?

[toondane]

How does the printer print colors and then white? Do you have to run the film throw twice

[JustGameBro]

Where specifically did you get your tote I’ve been looking on Amazon and can’t find them anywhere ? 🫠