Mitsubishi Ecodan Air Source Heat Pumps

In this episode we take a look at the Mitsubishi Ecodan and a typical package for your home. We discuss the controls, a closer look at the cylinder and components themselves and a sneak peek at the internals of the heat pump.

Please like, share and hit that subscribe button.

#SeriousAboutSustainability #sustainability #sustainable #sustainablehomes#heating #homeheating #airsourceheatpump #gasboiler #boiler #heatpump#renewableenergy #renewableheating #renewable #renewables #netzero #climatechange#climatecrisis #homeowners #homeownerlife #warmth #globalwarming #carbonfootprint #affordablewarmth

[DEPHECTDJ]

Hi mate. Lovely video. Ps that prv in the outdoor unit is for the hydronic side.

[danbramill]

Hi there, you can turn the main pump speed down, in most cases to minimum, it’s a 15 meter head pump and they come set to max as standard, also you can adjust your legionella program to min.

[jeffn]

Many thanks for all your interesting and informative videos. In this one you mentioned the latest Ecodan FTC6 controller. I believe this now has a function called Quiet Mode, but I haven't nanaged to find any info about it and what you can do with it. Any info at all would be greatly appreciated. Thank you 🙂

[hasnat]

I’m looking to buy a flat in a block that has 20 of these on the roof directly above my flat. Do you reckon this would create a lot of noise and vibration being so close to them?

[terryrigden]

Thanks for the info. Do you have a video showing how I could adjust the weather compensation

[nareshgp]

Thanks for this great video. I'm at a point of ordering a heat pump and everyone keeps telling me to use a buffer tank, whatever brand I buy. 1 Mitsubishi guy said it's not needed and I was confused. So i can safely buy the 11.2kW without buffer tank ?

[pmbpmb]

I am reading that ecodans defrost cycle is set to come on when 5 degrees is reached, this seems excessive given the fluid in the system and that in the UK five is achieved often but it’s not freezing point or close, can it be altered to lower ?

[Powertoyah]

Hi Jason I have 8.5kw ecodan with underfloor downstairs and rads upstairs, each zone downstairs has its own heatmiser room stats and a nest stat for upstairs, I have a cop of 2.3 on average, what would be the best way of setting it up? At the moment I removed the actuators on the manifold to keep the flow rate up and set the main controller which is in the hallway as the main stat.

[seanorourke]

Well done mate, a very comprehensive video I had lot's of questions you covered them all👍, sorry just one question since it may not need a buffer tank dose it use an inverter generator heat pump

[jamesanderson]

I have this system for the last 10 years mine is the suba dancing fan have not had many problems in that time replaced a fan couple of times does not seem to be switching over now from heating to water the zones all seem to be in the locked position water and heating on together

[malinkakm]

Which one is better mitsubishi ecodan or vaillant arotherm plus?

[sullydee]

can this unit heat radent floor to 70deg. 3500 sqft house in 30 deg, outside without heat strips and keep floors that temp without heat strips when it gets colder outside

[jasongittoes]

Any chance of a diagram of the connection from the pump to the cylinder including a buffa tank ?

[davidreece]

Is the Mixergy smart cylinder compatible with the Mit'si ASHP ?

[acdiversitychannel]

I have one of those identical system in my home, I have come accross a code error L9, any suggestions in what i can do to fix that? i have tried multiple resets but no joy... thanks in advance

[kaloyankisyov]

Hello, I have heat pump its model is mitsubishi ecodan 8.5 kw puhz-w85vaa-bs.
I am not using DHW only for heating and I don’t have water flow sensor, but when I start the heat pump, error code EE appears. Please help to solve this problem.