Switching Regulator Compensation and Stability (How To)

preview_player
Показать описание
Switching regulator/converter compensation is a topic that may seem more complicated than it really is. In this video I show:

1) How to tune the compensation values on a real board.
2) How to simulate the same circuit in LTspice
3) How to get a Bode Plot using LTpowerCAD
4) The difference in compensating current mode and voltage mode parts.
5) The three types of compensation.

This applies to all topologies (buck regulator compensation, boost regulator compensation, etc.)
  1. Go Circuits
Рекомендации по теме
Switching Regulator Compensation 0:20:27

Switching Regulator Compensation and Stability (How To)

Module 2:  Introduction 0:18:38

Module 2:  Introduction to Control Algorithms in Switching Regulators

Switching Regulator Component 0:17:00

Switching Regulator Component Selection & Sizing - Phil's Lab #71

How to design 1:55:33

How to design perfect switching power supply | Buck regulator explained

Common Mistakes in 0:13:32

Common Mistakes in DC/DC Designs: Basics of Buck Converters, Converter Capabilities & Part Selec...

How to measure 0:24:17

How to measure Buck converter loop gain and phase

Mastering Buck Converter 0:09:15

Mastering Buck Converter Feedback Control | Voltage Regulation Explained!

Loop Compensation Made 0:05:37

Loop Compensation Made SIMPLE

Foundations (Part 1.A) 0:05:35

Foundations (Part 1.A) - Understanding Bode Plots and Stability of Power Supplies (2 of 2)

EEVblog #90 - 0:17:04

EEVblog #90 - Linear and LDO regulators and Switch Mode Power Supply Tutorial

Practical Guidelines: Stability 0:35:00

Practical Guidelines: Stability of Offline Buck Converter with ViperPLUS

DC - DC 0:18:46

DC - DC Converter Control Techniques, Stability Analysis of Voltage Mode Buck Converter Part 1

How to design 0:44:22

How to design 3.3V output from 50V input? Introducing Richtek RT6204 60V Buck Converter

Stability Analysis of 0:12:10

Stability Analysis of Power Supplies

How do Opto 0:04:45

How do Opto Isolated Power Supplies work

Buck Regulator Tutorial: 0:21:26

Buck Regulator Tutorial: Testing

LTpowerCAD: Loop Compensation 0:06:23

LTpowerCAD: Loop Compensation & Load Transient

28V-2A Adjustable Low 0:05:19

28V-2A Adjustable Low EMI Switching Power Supply

Power Supply Compensator 0:15:31

Power Supply Compensator Design without Equations

Become An Electrical 0:00:24

Become An Electrical Lineworker

MCP16301 Buck Switching 0:02:45

MCP16301 Buck Switching Regulator Design Analyzer Tool

Analog Electronics 2 0:33:25

Analog Electronics 2 - Stability Compensation

Resolving a current 0:10:42

Resolving a current control mystery in PWM converters

Power Supply parameters 0:17:30

Power Supply parameters - Loop Response

Комментарии
Автор

Great video, thanks! Would be great if you did an isolated flyback (or whatever topology) that includes a TL431 and opto.

idk
Автор

Hope you attach your files used in the demonstration it helps, thanks for your effort any way, appreciate

islamsaeed
Автор

Very good and understandable explained ! If you want to make a lab power supply then you also have to introduce a op amp for current sensing does that mean that you have then two different compensations which adjust the feedback line ?

Telectronics
Автор

Where we can download that simulation?

yasirshahzad