Top Gun P-51 Mustang | 3D Printed Plane by 3DLabPrint

This 3D printed P-51 Mustang plane is modeled after the real P-51 Mustang in Top Gun: Maverick! Such a cool looking 3D printed plane and it also flies great!!

P-51 Specifications:
Length: 807mm
Wingspan: 992mm
Height: 226mm
RTF weight 4s: 970 grams

Thank you so much for watching!

See what else I am working on:
#3DPrinted,#RCAirplane, #ItFlies

Parts Required for Build:
Check out the 3D printing basics list, and the P-51 Mustang list.

Print Settings Coming Soon!!

Disclaimer: I am sponsored by some of the products I mention. However, all of my opinions are my own. Some of the above links are affiliate links, that does not effect the price you pay for a product, but I may receive a small commission if you make a purchase. This helps support my channel and allows me to continue to make videos like this. Thank you for your support!!

[UE]

As an old Gas RC guy this print your plane thing is the stuff of dreams 40yrs ago! Just ordering a 3D printer.. My kids are talking robots and stuff and will be really excited about learning 3d printing. We will not be short of ideas and stuff to design and print for sure. Thanks for the videos sure brings back memories. By the way APC props were started as a retirement hobby by a member of the club I was at as a kid. He would bring us props to test on our planes. Our once a yr club pylon race he always had the fastest plane😆

[mikenowland]

10 out of 10 for the build, the flying, the camera work and for not getting CA on your fingers that takes me a couple of days to pick off 👍😊

[SammyB]

I’ve been watching and subscribed to your channel for a few weeks. Trying a 3D Lab Zero and it kills me to see how easily all of your pieces key together. Mine are always a struggle. Lots of help watching your videos and it’s getting better printing them but this thin wall printing is a steep curve for me. Thanks for the great videos.

[TedGiddingsplanes]

LEGENDARY US TOP GUN P -51 FIGHTER PLANE | 3DLabPrint !!!!AWESOME WORK MAN

[doverivermedia]

Always great to watch your new videos Troy. Love the wing catch design. Excellent job .... Nice to see your missus get involved too. Most become RC widows lol. Really firing me up to get back into the hobby, but utilising the power of 3d printing. ... 🇬🇧

[alvinlee]

Amazing bro. Your project never fails to amaze.

[InspGadgt]

Yay...your finally getting around to some 3dLabPrint planes :) The P-51 is one of their earlier ones so they are a bit more difficult to build but the early wing ribbing design on this and the Spitfire MK XVI is still my favorite wing build.

[SammyB]

Also, nice mention in the new AMA mag this month under the “focal point” section.

[nikosgardenreserve]

Awesome sir! I'm printing the eclipson model c then after that I'm gonna print the EWW 180 EDF! THANK YOU!

[SiliconRiot]

Tom's Mustang... He actually owns and flys it, has been at the Planes of Fame Museum in Chino CA. I got some good photos of it for reference since you can walk right up to it in the hangar.

[jeffsmith]

Been watching you videos for quite some time. Have followed your printing recommendations for LW-PLA and do not get what I would call "acceptable" results. I have built several different Eclipson planes, the Shark, and this P51 and in PLA all come out fantastic! Use a PRUSA Clone, Voxelab Aquila, ANYCUBIC Kobra and ANYCUBIC vyper all fantastic with PLA - no luck with LW-PLA yet... Can you PLEASE do a show on e-sun LW-PLA and show Eclipson A profile for LW-PLA and what a part should weigh and what it looks like UP CLOSE when you print it? Thanks

[creativeafterlight]

Another excellent job dude!!! I'm printing mine on a Tenlog TL-D3 Pro. Could you please post a link for the decal labels that you utilize along with any tips. Please and thank you.

[knowledgebyte]

Thanks Troy. Great video. I’ve built a whole set of 3DLabs planes and have also scaled down both the Spitfire and P51 Mustang. I’ll post some videos once I start flying again. Nice build. I’ll try TPU hinges next time.

[jimbarton]

Great build, it looks awesome and flies nice and would love to see you do the p38 lightening from 3d lad lookslike an interesting plane, and challenging

[an]

Hey Troy really appreciate the videos. Any way you can share the settings for printing this on bambu x1?

[dfjunioradrover]

I love your videos! I would like to show you my project of DIY plane mixing 3D printing + foamboard!!!

[inducatvius]

you got it done. i'm back in the rc-air hobby, started with the piper cub (hey it's free so why not) now it's the f4u corsair's turn. i only don't get the wing tip right. the angle is so large that space is created at the last 30 layers.
Does anyone have an idea how I can close it?

[InspGadgt]

I'm surprised the masking tape on the servos holds well enough. Personally I use an old trick from my RC car racing days and glue them in with Shoe Goo. Shoe Goo holds through even the hardest crash but is removable later so you can re-use the servo.

[elijahf]

i bought this model a long time ago, really wish they'd update it with landing gear and some other modernizations to the design like filament hinges. broke 3 of the things landing in soft grass

[rcpowres]

Great video! 3d labprint should bring out an LW version of all of these plane series (mustang, spitfire, me-109 etc.)
Thumbs up for flying and filming!