REEKON M1 HACKS #woodworking #diy #woodshop

Показать описание

Came up with a couple of ideas to use this Reekon M1 device for the table saw. Hope you can do better than I did.

#woodworking #toolstips #diy #woodshop #weetzerswoodshop #

Weetzer's Woodshop

Рекомендации по теме

Комментарии

"Genius At Work" thanks for sharing.

bozidar.dimovski

Good job, thanks for sharing your ideas.
God bless you.

davidgiwm

I’m watching this in 2025. Great video! I’ve owned my M1 for about a year now. Prior to that, I acquired the Wixey Products Digital rip fence, which has the readout attach to the fence as it reads along a special rail in the front. Since the fence and rail are identical to the ones on my Laguna Fusion tablesaw, getting this and installing was a no brainer. The digital fence, however, is $499.

What you have done is great! And you can easily move the M1 from miter saw to tablesaw sled to rip fence. I would do one thing a little differently than you did it. You’re actually using the cutoff of the rip as your keeper. I would touch off the rip fence directly to the blade. Then move the rip fence as you normally would. Now you are keeping the usual keeper piece. If the M1 reads negative, just use the M1 FLIP function and you’re in business! What do you think?

stevennachlas

Nice review Ted. I must have one, thanks for sharing!

dannywilsher

Thanks for the video.
I have been looking at the measuring device since it came out and thinking of other uses for it, but you have shown other uses for it.
Are you from P.E.I ?

andreallard

You are a modern day pioneer, that's how the west was won!

bozidar.dimovski

brilliant idea! Thanks for sharing. Please use a push stick though bro and stay safe!

njdcornell

Your pushing the wood with your hands make me nervous.

migueltor

REEKON M1 HACKS #woodworking #diy #woodshop

REEKON M1 HACKS #woodworking #diy #woodshop

I Bought This So You Didn't Have To…

Using the T1 and M1 in conjunction to make your measurements and cuts without any pencils or writing

Quickly convert lumber to cut lengths with the M1 Caliber Miter Saw Measuring Tool

Learning something new everyday, the M1 Caliber applications are endless!

Make continual cuts without any hard stop required with the M1 Caliber!

Repeat cuts without any hard stop of pausing with the M1 Caliber

No tape measure needed, no hard stop required for the M1 Caliber Measuring Tool

Measure long to long or short to short point with the M1 Caliber #homeimprovement

Make long distance cuts fast and accurately with the M1 Caliber

Keep your speed high with no stopping in between cuts using the M1 Caliber Tool! #homeimprovement

Bevel cuts using the M1 Caliber

The REEKON Tools M1 Caliber cutting 45 degree miter cuts

Miter cuts are a breeze with the M1 Caliber Miter Saw Tool

Measure digitally and mark with one hand using the T1 pencil holder!

The M1 Caliber Adapter Fence increases the M1 Compatibility to almost every miter saw ever made!

Quickly cut miter cuts with the M1 Caliber Digital Measuring Tool

Measure and mark with one hand using whatever writing instrument you’d like!

Clamp, slide, and measure repeat cuts faster than a hard stop with the M1 Caliber

Repeat cuts without the need for a stop block using the M1 Caliber Miter Saw Tool

bUt tHE M1 cAlIbEr mUsT nOt bE aCcUrAtE

Make double miter cuts, measured from the inside edge, with the M1 Caliber Tool!

Knock out your cut list on the miter saw without stopping with the M1 Caliber

Measure inside edges of miter cuts without having to subtract an offset length with the T1 Tomahawk