DIY Concrete Overlay!

Products used in this video:
Prep:
Application:
Tools:

0:00 Intro
0:31 Trowel Overlay
0:59 Tools
1:25 Prep Process
2:28 Patch Pop outs
4:25 Priming the Surface
5:46 Mixing
7:32 Application
10:19 Outro

[piromchai]

Nice job and clear step by step. Wish you show the finish product when it’s all done.

[f.demascio]

The solution I was looking for!
I've got 4 areas to do. Seems more affordable than replacing crete.

[curliot]

I will try this nicely presented procedure to my worn-out concrete ping-pong table. Thanks alot

[johnmichaelkarma]

I'm resurfacing my old cement pool deck. After mixing about 10 half buckets using the same bucket a 1 1/2" hole was created in the bottom center of bucket. It happened in an area that was not masked and ready to be poured. Be careful not reuse a plastic bucket too many times.

[TonyFerrera]

Would I be able to use the overly product to set electric floor heating mats in ? is is for a garage 12 x 20. The mats are 1/8 in thick . I wanted to lay 1/4 inch rigid panel insulation under the electic mats also but will probably delete that. Too thck end product and prone to problems - cracking.

[TheOirishhAmerican]

I didn't realize it was so simple, I have an old 10x14 car port parking concrete slab that has some nasty cracks in it, dimples etc that would be nice to just simply overlay with concrete.

[eugenehernandez]

I had a outfit come in and resurfaced my patio with NewCrete by Rapid Set, my question is can I overlay with the product used in your video?

[stuartfarrell]

whats the life expectancy of the on a uncovered patio in up state new york with the freeze-thaw cycle

[motomarty]

What is the ideal outdoor temperature to apply the overlay?

[leonroy]

Hi guys, can you use this product and apply stamping to the overlay? Would really appreciate some feedback. Thanks

[xnebmne]

I want to extend my patio about 6 inches. Can I put down the new concrete and then put an overlay to make it look like a solid patio?

[matthewwilson]

I noticed that you applied Sure Bond before the Easy Patch and then again before your first Overlay coat. Is it necessary/ recommended to apply Sure Bond again before applying the second coat of Overlay?
Thanks in advance!

[trentcarter]

I'm trying to do a finished concrete floor in a shower that's not slippery but I also want it moldable to stack up the sides about 3 to 4" . Do you have a brand and type of mix you would recommend? Thanks

[ozzman]

So I flip houses. And this is perfect to resurface the concrete where the foundation company did repairs and filled where they did the repairs. It makes an ugly square patch. I could definitely grind that area and apply this overlay and it would make that concrete look brand new. We also can repair driveway cracks and then use this too rather than replacing the whole driveway. Could save me a ton of money. Thank you so much.

[randydaigle]

You did good right up until the end at least I didn’t catch how long I should wait before sealing this cement

[ryangosling]

Great video mate, what is that tape you use for the edges called ?
Thanks

[loffy]

Can it be used in garage where cars will be parked?

[eltiburon]

Will this work over painted concrete surfaces?

[samueladams]

Is this a brand name version of cement all ?

[michaelchesney]

Could I do a driveway? It's only a couple years old but kinda shoddy surface finish.