2006 S2000 Dyno Tuning - 2011-07-25

Tuned by Brian @ Advance Power House using a Hondata FlashPro unit.

Engine Mods:
K&N FIPK Intake
HKS Hi-Power Dual 60-50 mm exhaust
T1R 63 mm resonated test pipe

Dyno: DynaPack 4000 Series
SAE Correction Method Used: J1349
This particular dyno is conservative, and reads lower than most local dynos in the area.

Original tune for baseliune was the "TODA Header"
preset calibration supplied with the Flashpro

Ambient Air Temperature: ~30 deg C
Relative Humidity: 40% +/- 5%
Barometric Pressure: 98.0 Pa (Standard at sea level = 101.3 Pa)

Peak Power Before: 200 hp @ 7850 RPM
Peak Power After: 212 hp @ 8020 RPM
Peak Torque Before: 148 lb-ft @ 6470 RPM
Peak Torque After: 154 lb-ft @ 6440 RPM
Max Power Increase: +21 hp @ 4800 RPM
Max Torque Increase: +15 lb-ft @ 4500 - 5500 RPM
Rev Limiter: 8500 RPM
VTEC Engagement: 5400 RPM
WOT A/F Ratio Range: 13.25-13.75:1 (progressively rich towards rev limiter)