How to Fix a Ford Raptor for $80!! (4X4)

Fixing our Ford Raptor's 4X4 For $80!

Hope this helps :)
How to Fix a Ford Raptor for $80!! (4X4)

[mikebelcher]

FYI never beat on a bolt with the nut removed . Remove the nut after hammering on it to keep from msig up the threads at the end. Just a tip

[tlott]

I think $15000.

And the IWEs were probably good and you just need to replace that solenoid to have back full functionality.

[Blue_Flame_Raptor]

I used the dorman iwe deletes. No issues with 10k hard miles on them so far. Mpg dropped maybe by half a mpg but that doesn't matter when it's 9. Just gotta keep up on diff maintenance.

[neilmurphy]

That's the problem with extended warranties you're completely relying on the dealership or warranty company to fix stuff and pay for it at least with the factory one you know were your standing 90% of the time.

[chicocheche]

That wheel thing you were looking for is called a wheel bearing

[kristoffay]

I think the rotational clearance of the shaft while locked is ok for the required short time fully shifting in and out, but the grinding noise can be a problem still. I have a troubleshooting suggesstion: I assume that there is no clodging in the vacuum system so the vacuum can fully released if you switching to 2 WD mode. If there is so, then I would check the clearance of the outer cv joint housing by hand in the unlocked condition. The housing and its shaft rotates freely inside two needle roller bearings while driving 2 WD, experiences showing that theese bearings or the related surfaces can wear out really fast. Sorry for my bad english, best wishes from Hungary!

[mikebelcher]

Need to find a manual hub locker. Much better idea than a gear. You're so right leaving iengaged would ruin gas mileage and cause more wear and tear

[mannypelambres]

I have a ford raptor and does the same noise when is on 4x4, did you fix it? Did the noise go away?

[Ethan-zvvn]

Probably somewhere around 11k for the raptor.

[connorspurling]

Just leave the nut on that lower bolt when ur swinging like that. You won't have to worry about the threads

[XXCLUTCHPCGAMINGXX]

Did 2010 6.2s not have the 6.2 sticker

[mothertrucker]

Come to England lets do a Collaboration?

[williamcobbs]

Iwe I think it means integrated wheel end

[russellnuttall]

You should hook the line back up to so it wont grind. $12, 000 for truck

[dravenweber]

9250 for it? Honestly no clue just an estimate with mileage, condition, and being someone you knew

[blindcarnage]

6, 500 but lemme cop the truck instead of tickets lol

[neilmurphy]

Why do Ford love to use vacuum for the Hub's why don't they use a electronic motor like every other companies.

[mikehensley]

IWE stands for "Integrated Wheel Ends".

[thewayiigo]

I would say you paid $20, 000 for the Raptor Ute.

[crazyazzcambelastname]

google to the rescue!! Integrated Wheel End