Best Table Saws for the Money! (Table Saw Buyer's Guide)

Best Table Saws for the Money! (Table Saw Buyer's Guide)

This video was sponsored by Skillshare

Links*

Support the Den Of Tools:
BitCoin: 3M3eH9Lyjo9XPjsUZ5LY9SWWeUJuCc4nqT

Connect:

My Favorites:
Get 10% at OLight with discount code: TDOT10

And no, we don't talk about how we "Do the Bear", sorry.

Mailing Address: PO BOX 76, Livingston, MT 59047

*Just assume all links are affiliate links they might not be but at this point who cares.

[somebody.oncetoldme.]

Didn't expect to be so into woodworking these days, didnt expect to see someone use that animal filter to make a youtube tool review channel. But, it's good information so i'll bear with it.

[matthirn]

I have used a SawStop at work for years and last year I ran a finger into the blade. Still not sure exactly how I did that, but I was in a hurry. Never rush with a table saw. It did hurt, but the cut was minimal when you think about being hit by a 1/8" wide carbide tooth. I was happy to have the safety feature on that day.

[ajlehn]

I've been woodworking for the better part of 50 years and have been lucky in having two accidents on my table saws. When I had my second accident earlier this year which required 15 stitches over 3 fingers my better half said that I needed to get something safer than my early 50's Delta Homecraft saw that was nearly as old as I am or she would sell ALL my tools. I felt that a bit drastic but I respected her concern for me to keep all ten of my fingers and I purchased a SawStop 3HP PCS saw. It was the best move I ever made. The saw is a very well made piece of equipment. They are called accidents not on-purposes for a reason. Another thing is CRC 3-36 is a great rust inhibitor followed up with Johnson's paste wax.

[systemfisch]

I have the jobsite Skil Saw as it was the only one available for pickup close by when I desperately needed one at the beginning of the pandemic. I love that thing, the worm drive makes cutting large stock a breeze. I've built a heavy cabinet around it with fold-up back and side tables and now can safely rip full size sheets. I even use it to cut 2x4's into 1x4's in one step to get cheap boards 😉

[taylorsmith]

When I first got into woodworking I found a decent Delta/Rockwell 34-338 on CL for $75. I spent plenty of time disassembling, cleaning the machine, and updating wear parts (rebuilt arbor assembly with new bearings, wave washer, bushings etc.). I spent alot of time learning how the machine works and aligning and "tuning" it while going through this process. A PALS system makes fine tuning a contractor saw much easier. I bought and mounted the 30" delta t3 fence, a link belt for the original 1.5 motor, relocated the power switch, and retained the factory splitter/knife. These updates and upgrades along with a good freud blade make for a wonderfully accurate and stable saw. Does it compare with a uni saw or other full size cabinet saws? Of course not, but the knowledge and understanding gained through the process is invaluable to me. I know much more about a future purchase now. Financially, it's not too bad even with the upgrades and blade. So, IMO quality contractor saw ate great options. Just be prepared to put money into upgrades and time into refurb.

[tom_schroeder]

Even with this video being 3 years old, it is one of the best overviews and introduction to saw types and saw accessories for the homeowner and DIYer. Well worth watching.

[Engineerboy]

Wow, what a wealth of information. I just used an old Montgomery Wards table saw to do wood flooring and wood stairs. Oh how I wish had spend the money before starting the job and got a good accurate table saw. I had to manual make the fence parallel every time!!! I'm a casual home DIY'er, so I think I'm gonna go with the Skil TS6307-00 I love the fold out legs, rack and pinion fence and PRICE! Thank you so much for posting this video.

[Luigiz]

I just picked up the 10inch Kobalt table saw with rolling/collapsible stand for $229. It's a solid saw for DIY/home owner use. I love the extendable table top and how compact it collapses to. Perfect for my small garage.

[Lwimmermastermetalart]

Love the bear filter! Well produced video. Now I realize this is several years old by now but same ideas still apply. I too am a huge fan of the Delta saw. Bought a used one 48 years ago when I had a cabinet shop. Then when I started my machine shop I kept it for odds and ends. After several years we landed a great customer who we made parts for from slabs of 2 inch thick 2 foot by 4 foot PVC and ABS. We still use that saw today to cut them to sizes needed. Obviously we need a special type of carbide tipped blade, but that thing still runs strong. Now being retired I have a garage shop. More metal working however still almost all the wood working machines as well. After a lot of research I bought the Skill saw. For the money I couldn’t be happier. Made a small sled and bought a decent miter gauge and away we go. Evolution makes one that can cut various materials too. They have a great universal blade but it does run at a slower RPM to accomplish cutting non ferrous metals and plastics. They have a really nice new model however it’s not available in the USA yet. The one you can purchase on Amazon is still ok but I would have preferred the new one. It actually has a small sliding table on the left. Some of the best saws made for commercial use have sliding tables. This although no where near as accurate is still a great feature for a home shop. Enjoyed the video 👍🏼👍🏼

[VincentDangerWater]

Serendipitous timing on this video. I had just finished the epoxy flooring in my shop, the final step of the "build from scratch" process, before the finish carpentry, and it was time to start looking for a table saw. I got the Delta 10in on your assertion. I'm in love. Thank you for the A+ advice.

[marcosvaldes]

One of the most comprehensive and educational information about must haves for table saws and accessories. Nice job!

[adventuristnw]

I had that new Delta 36-725T2 and you are right, it died super quick. Two of them in fact, as they bother were one of the very first ones. Delta customer service was on the spot with the second one and helped troubleshoot the problem. They drop shipped me a fixed version and paid to have the old one sent back for their R&D. Sold me on Delta.

[darryldesjarlais]

I have had a Bosch 4100 saw for the last 6 months and love it! It folds for storage and has wheels to transport! Makes very accurate cuts as well!

[PPMOCRG]

I have the Skilsaw worm drive portable saw with stand. The stand is great and it’s easy to move, fold, and unfold. The motor is good and no shortage of power for a small saw.

[forrestberg]

My man, watching you talk about table saws as a bear put me in a great mood this morning

[DIYAudioGuy]

I love my gripper push blocks. Highly recommend.

[blackstars]

I was stuck on dewalt now I can expand my search, thanks for this video.

[victoryak]

Thanks for a very in depth and helpful video. Just the right approach and comparisons, avoiding the “apples and oranges” approach of other channels.

[pikachuthegayatheist]

Why was in school we had a woodworking shop that used in Delta Rockwell from the 1970s, and to get around the fact that the table saw didn't have a riving knife the instructor used a block of wood to push the other pieces through wile covering his hands from the kickback from the blade. It acted as a stopper, because in the slotted area of the table he had a piece of wood, while the block actually had a groove to fit into the slotted area to make contact with the other piece of wood, or at least that's what I remember. He built the piece of wood to protect from the table saw because it didn't have a riving knife. It's kind of simple DYI to get around the kickback from the table saw not having a riving knife by just using a block of wood push the other piece of wood through the saw.

[naturaIIydifferent]

I have the T1 version of the Delta hybrid and it's bad ass. Best saw I have used in the price range!