How to put lead in a mechanical pencil Part 2 #shorts

Another way to put lead in a mechanical pencil is to simply insert lead where you normally write. This works well when your eraser has been all used and you cannot get it out. #howto #howtolife #reels #tiktok #satisfying #pencil #mechanicalpencil

[qiyunlei]

Never do this to your led pencils this can cause jamming and break led and waste it (I already saw the lead about to snap into 2)

[UrStacysHr]

How to ACTUALLY refill a mechanical pencil
Step 1:go to the back of the pencil
Step 2:remove the top
Step 3:put the refiller in the pencil

Congratulations! You did it!

BUT, if theres an eraser, you might need to remove it to so you can put the refiller in..

Thank me later <3

[leothefirst]

You meant "How not to put lead into a mechanical pencil". Try doing this with a 0.3mm and you'll see what I mean.

[dtb.yanaaa]

Disclaimer!!: Don’t Do This To Your Mechanical Pencils Because It Can Cause Lead Breakage And Jamming. Refill It From Taking The Eraser Cap Off Then Taking The Eraser Out And Inserting Lead. Put The Eraser Back In And The Cap Back On

[Mirwahatun]

I used 0.7 mm lead and I do refill it in this way.

[NganLe-zpsq]

Can you make a video how to get out the stucked lead in mechanical pencils because i am now cant put my lead in

[GraysonMcF.]

Never do this to mechanical pencils I tried before and the lead just snapped into 2 you will need another piece of lead and then you will need to remove the bottom and there will be a hole to put your lead in and then you can put the bottom back on and your good to go

[Shining_starever]

I will tell you so if you have like a mechanical pencil that you can take the top off put the pencil put the pencil upside down get some led so then you’re gonna want take the top off then u are going to want to hold the cylinder part down.then put the led in make it a little small so you don’t jam or do anything/leave crums inside the pencil part then you’re gonna want to wait till the cylinder goes up then put back the pencil tap then there you go if you need more lead just push it I hope this helped. By the way on how he did it you saw that there was crumbs you heard the snap and while doing that the led can fall out break/lose it while u are writing

[rttngutzzzz]

oh yay, im not the only one who does this!!

edit: some comments are saying dont do this, i also recommend you dont, but im careful with this stuff, ive been using mechanical pencils since i was in 3rd grade so i know how to do this well!!

[nurulhudafoundation]

Thank you very much
I fixed my pencil doing this

[LOW-LEVELYT]

Don't do that its will break the led and cause jamming

[Redbird_movie]

Hey uhm I use bic lead pencils and usually I take the eraser off and put the lead inside and I don’t frickin put the lead from the top I almost broke my pencil

[Null_]

THANK U IT ACTUALLY WORKED I SPENT 3 HOURS TRYING TO PUT IT THANK U

[IneffableRodd]

TYSMMM i was putting the mines in incorrectly, no wonder the tip didn't out! hahaha!

[lemonade]

Thank you so much for the tutorial…this really helped me a lot ❤❤❤

[PriyankaDas-vlpi]

Thanks😊 it helped me even though it didn't work for some

[paramasivamsathasivam-qbuo]

You’re doing it wrong, but it in the back

[JaxGreen]

What is the name of this pencil. Been searching for it for 11 years

[joyedits]

The dust if you breath some what can it cause