SuperATV Prop Shaft Installation on Can-Am Maverick X3 | How To

Take a look at what it take to install one of SuperATV Heavy Duty Rhino Driveline prop shaft into a Can-Am Maverick X3.

Our shaft utilizes at 4340 u-joint, shaft made of 4130 chromoly tubing, phased and balanced offering zero vibration. If you want to install a strong prop shaft this is the prop shaft you want.

Order your prop shafts today:

#SuperATV #RhinoDriveline #BuiltForBattle

[schumifchamp]

What light are mounts are those and for what length light bar?

[ericlaplante]

rear fix yok has to be 180 with the front one even with the stock drive shaft???

[dougcompton]

I think you meant to say rotate 90 deg.

[johnm.lashmit]

Something with the aligning of the shafts isn't making sense, by the way it's shown in the video the rear yoke out of the transmission is in the horizontal position and so is the front yoke but before front shaft went in it was shown that the front yoke had to be vertical which would've put the pinch bolt vertical also but when in the machine front yoke is horizontal putting both shafts in the same position. It was said they have to be 180 degrees off, 180 is half a turn which is still the same position, was that supposed to be 90 off, if so that's not the way the video shows it going to gather.

[lilrock]

Love the driveshaft, hate the bearing. Being a solid mount with no rubber to isolate it the bearing and driveline noise resonates through the floor and entire cage. Very annoying.

[renedelgado]

Shouldn’t the fixed ears on the shaft be facing the same front and back?

[corinthearcticfoxxx]

I’m about to get a x3 is it normal for the drive shaft to squeak? Or could it be the bearing that’s making noise,

[billyzkool]

I watched this video but there wasn’t a part about the stock rear slip joint being seized up taking 2 weeks a torch and a sawzall to get off ??? Lmao

[mandytuning]

A bearing that is pressed, hold with snap ring and need to be serviced i will not use the retaining compound loctite, with that much it willl turn in hell to remove it, even with all the heat of the sun .