DIY 3 Axis Camera Slider Demo | Arduino & GRBL Powered | With GRBL Panel

Arduino + CNC Shield + GRBL + Panel = Epic Win
▶▶ Open up the description for the viral vibe. ٩(̾●̮̮̃̾•̃̾)۶ ▼▼▼

There you go! ☆♫❤
┏(-_-)┓┏(-_-)┛┗(-_- )┓

▬▬▬▬▬▬▬ notes ▬▬▬▬▬▬▬

GRBL makes everything so easy. Thanks a bunch to all the contributors!!!

▬▬▬▬▬▬ vlog playlists ▬▬▬▬▬▬

▬▬▬▬▬▬ follow me ▬▬▬▬▬▬

► Add me on Snapchat: Geisterbahn

▬▬▬▬▬▬▬▬ ■ ▬▬▬▬▬▬▬▬

~ ~ ~ Saturday ~ ~ ~
▼ Recapping my last update briefly
▼ Reviewing the quick release plate and the cube part
▼ Talking about the camera placement and balance
▼ Explaining which software I used
▼ Going through my setup (CNC Shield & GRBL)
▼ Starting the GRBL Panel and talking about the setup briefly
▼ Connecting everything and going for a first demonstration
▼ Writing a bit of GCODE and taking a few videos with my Sony A77
▼ Talking about the flawed construction and the wiggle
▼ Mounting the slider on two tripods
▼ Talking more videos and seeing a lot of jitter
▼ Talking about rebuilding the slider with more rigid components

Thanks for watching! :)

▬▬▬▬▬▬ used music ▬▬▬▬▬▬

▽ Unknown Brain - Perfect 10 (feat. Heather Sommer) [NCS Release]
Music provided by NoCopyrightSounds.

▽ ChrisViral - The Xiphos Project

▬▬▬▬▬▬▬▬ ■ ▬▬▬▬▬▬▬▬

[JanJanJanJanJanJanJanJanJan]

Damn, that's a cool intro. Now I'll go ahead and watch the video.

[Carwyn.Morris]

I'm just in the middle of building one of these myself. What's weird is I found the things that I thought were going to be easy were tough and the things I thought were a nightmare were simple.

[DiscoverRajivVlogs]

Try new code no pc required how to mechatronics.

[hyperhektor]

leadscrews arent "the" soloution. Belts are way faster, you just have to fix the build.
One reason is, belts are designed to operate on a preloaded tension. So if the tension is set up wrong thats one source of error. Another thing is, if the axis is too thin or long it might bent slightly. To fix this you could support it from the other side with a ballbearing.
At the moment you have one contact point (bearing?) then the Beltgear and then it floats in the air. I mean imagine the beltgear between 2 bearings so it is supported better:

for the long rail you could by so called supported rails looks like this, but i didnt searched for the cheapest just an example:

OR you could buy a wooden plate to support it. cheap fast and cost effective:D i would try that first.

i guess you arleady seen this ? :)