DJI P4Pro Plus Firmware Update

Having rouble with your Phantom 4 Professional's firmware? We were too! Ran into some snags but figured it out. This short video will show you the problems we had and how to avoid them while updating the firmware on your Phantom 4 Professional.

[EnzoMaisanoTELLTHESTORY]

Appreciate all your help with this. Mine arrives this week, so your info is super helpful. Keep up the great work

[dennishmiller]

Glad you had only minor hassles <doing> the upgrade. Now the problems really begin.

[bjorker]

Thanks so much, got my 4 pro + a few days ago and already flew a few times....just came across an update firmware notification today. Thanks to your awesome video you saved me all the frustrations! Lol Already up to 77% thanks to you again

[luapynneb]

I upgraded to the P4-ADV-Plus, and I never even got as far as you got, As it was brand new at first it asked me to register the drone! but part way through that it then asked me to update the drone!, so basically I was getting nowhere stuck in a loop? as it never gave me time to finish either job (register/upgrade) before switching to the other job.
I found smashing the drone in to little pieces really helped fix this problem, the experience has left me scared for life, my left eye has a permanent twitch, and I can here the DJI start up tone none stop, I now live in a ward full of male nurses.

[GPS]

Can you please do a demonstration of the 5.5 inch built in screen outdoors in daylight at maximum brightness thanks.

[nrpd]

Awesome! Spent an hour trying to figure out why the start download button wouldn't work. Switched the cable around and Poof! Thanks!!!

[morrisenyeart]

Very informative video thanks. One difference in connecting the P4P and P4P+ for the firmware upgrade. The video shows the P4P+ so the connection is from the controller USB to the drone as you have demonstrated. If you have the P4P the connection is from the drone directly to the iPad, iPhone, etc, not the controller. At least that is the way it worked for me.

[francorus]

Was doing the same thing whole time until I saw the video. Thanks guys!

[zacharyhancock]

hello. i've got a phantom 4 advanced. 2 weeks old now, it said to do a firmware upgrade so i did so then i needed to recalibrate my vision sensors so i did so. now on my controller, it's not displaying the video stream from the drone to my monitor. any help with this

[aynurkarakaya]

Hello,

I have phantom 4 pro. I started to get weak image transmission signal warning and my phone screen shows black/green only. I checked & played with the HD settings but no success. According to the dji app, i have the latest firmwares, however when i check the release notes on the dji website, it says that the rc firmware should be 1.4.1.0 whereas the "about" section on the app shows that i have 1.9.2+ for the RC... i always did the updates via the app according to its notifications but there seems to be an inconsistency. Can this be the reason for the weak image transmission signal? If yes, how do i get the correct& corresponding rc firmware via the app?
Thank you

[jonathanpaparas]

Hey! I find your videos very useful, thank you. The following happened to me and maybe you can help me: I bought a Phantom 4pro + and I blew it on the door of my house and experienced very low signal (the screen turned green, and I also lost a signal completely, this made me nervous but started to return to home alone) I have a Mavic pro 2 years ago and at the door of my house I can fly it to 800 meters without losing signal. I researched a bit and found it useful to turn off the Wi-Fi on the remote control that comes with the included screen, and use the 2.4Ghz band, this got better, but at 500 meters I lose signal. Is there anything I can do? I'm seriously thinking about returning it and staying with the mavic that gives me more security.

[jurgi]

Thanks for the tip with the micro usb cable...kind of silly...I did the update with my mac but still had an issue that it says "Update required"...after I have done it with the two micro usb cables it disappeared. Top!

[kennkart]

whats with the beeping noise? i tried to move around the joystick and still beeping.

[gearjammermedia]

Had to try multiple times to update my phantom 4....the usb from my phone straight into the drone using the go app. Not sure what i did right but after the progress bar freezing at 1% then 4% a few times it magically worked one time. Think its just luck of the draw. Reset the controller once as well maybe that helped.

[rustanjayceeflores]

sir can you show what will happen if i will reset to factory settings the screen. i want to reset to factory setting my screen but i am afraid that the installed DJI GO will be gone..please help thank you and god bless

[DocDewberry]

What is the name of the USB cable to order from DJI or Amazone

[emptech]

Off the subject, do you know if there is a way to download the flight data from the p4p controller? I had an sd memory card in the uav go bad but some photos show up on the flight data and I'd like to pull the photos off. I'm afraid to reload the firmware in the controller for fear I may loose the flight data.

Jim

[BARSSTUDIO]

Hi, I have a Phantom 4 Pro Plus and i am having trouble to upgrade a remote to the latest 1.4.3 with an micro sd. Any info that can help? Thanks

[paulsmaglik]

Thank you for your video it help me greatly

[FrederickDunn]

Did all of this and every time I select "Go Fly" it just crashes. Spent a day fiddling with it and they finally told me to just return it for a replacement. They are also paying the shipping, but jeeze Louise... most trouble I've ever had with a DJI product. I suggested that they replace it with the P4Pro and not sent another P4Pro + but the woman just said "ok we are sending a replacement" and didn't understand the difference I was talking about. Anyway... hope the next unit is ok, I need it to be :)